Product Description
This cable pulling grip, item no. 109504 from KATIMEX, is a back-braided cable pulling grip with a side loop and thimble. The product is made of galvanized steel and is specified for cables with a diameter between 20 mm and 25 mm. The construction distributes the load evenly over the entire grip length to reduce point loading on the cable.Material and Mechanical Properties
- Material: galvanized steel (specified by the manufacturer).
- Breaking load: 22.6 kN (stated by the manufacturer).
- Max. tensile force in use: 7.5 kN (stated by the manufacturer).
- Total length: 750 mm.
Typical Applications
The text on the manufacturer's product page specifies concrete application areas for cable pulling grips of this type. Item no. 109504 can be used in connection with:- Industry (specified by the manufacturer).
- Wind turbine systems (specified by the manufacturer).
- Elevators (specified by the manufacturer).
- Cranes (specified by the manufacturer).
Handling and Construction
The manufacturer states that the ends of the grip are back-braided to the starting point and are not soldered or pressed, to reduce the risk of injury to the cable or person. The grip is supplied with a thimble, and load distribution is ensured, among other things, by compression sleeves, as mentioned on the manufacturer's page.Specifications
- Product: Cable pulling grip, item no. 109504 (KATIMEX).
- Material: Steel, galvanized.
- Cable-Ø min: 20 mm.
- Cable-Ø max: 25 mm.
- Breaking load: 22.6 kN.
- Zugkraft max / maximum tensile force: 7.5 kN.
- Total length: 750 mm.
- EAN: 4044489095047.
- Packaging dimensions (L×W×H): 76 × 6 × 1.5 cm.
- Weight: 0.22 kg.
Content generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.