KYZEN Defoamer – defoamer for aqueous cleaning processes
KYZEN Defoamer is an aqueous defoamer developed to control and reduce foam formation in industrial cleaning processes. It is particularly suitable for spray-in-air machines and other aqueous cleaning systems where process residues or cleaning agents can cause unwanted foaming.
The defoamer is added to the cleaning bath as needed and acts quickly, allowing the cleaning process to continue stably without issues caused by excess foam.
Controls foam in cleaning systems
Foam formation can occur as a result of, among other things, flux residues, solder paste, and other contaminants that enter the cleaning process with the parts. Too much foam can affect the operation and efficiency of the cleaning system.
KYZEN Defoamer is designed to quickly knock down foam and help maintain a stable cleaning process. The product can be used with KYZEN's aqueous cleaning agents and is added as needed when foaming is observed.
For spray-in-air and aqueous electronics cleaning
KYZEN Defoamer is concentrated, so only a small amount is required to control foam formation. KYZEN recommends starting with a low dosage and only increasing the amount if necessary.
Typical product and process data:
-
Application: Control and reduction of foam formation
-
For aqueous cleaning processes
-
Suitable for spray-in-air cleaning machines
-
Can be used with KYZEN's aqueous cleaning agents
-
Added directly to the cleaning bath as needed
-
Concentrated formulation
-
Effective at low dosage
-
pH: 7.5
-
Water solubility: Dispersible
-
VOC: 0 g/l
-
Flash point: None up to boiling point
The required dosage depends on the cleaning process, cleaning agent, and the degree of foaming.
Benefits of KYZEN Defoamer
-
Reduces unwanted foam formation in the cleaning process
-
Developed for aqueous cleaning systems
-
Suitable for spray-in-air processes
-
Rapid defoaming effect
-
Concentrated – used in small amounts
-
Can be added directly to the cleaning bath
-
0 g/l VOC
-
Supports a stable and controlled cleaning process
What is KYZEN Defoamer used for?
KYZEN Defoamer is used to reduce and control foam in aqueous industrial cleaning processes, including cleaning in electronics manufacturing. The defoamer is added to the cleaning bath as needed and is especially relevant in spray-in-air machines where flux, solder paste, and other process residues can contribute to foam formation.