Product Overview
AQUANOX A8820 is a concentrated Micro Cell Technology (MCT™) cleaning fluid from KYZEN designed for stencil cleaning. The product's primary function is the removal of wet solder paste and uncured adhesive from stencils used in surface mount processes. A8820 is supplied as a concentrate with a typical operating concentration of 25%.
Technical Characteristics
The product has partial water solubility and a stated boiling point of 291°F / 144°C. VOC at 10% concentration is stated as 88.5 g/L. Drying is performed with air, and rinsing is stated as optional depending on the process setup.
Documentation
Further technical details and manufacturer recommendations can be found in the product's technical bulletin and data sheet.
View data sheet from the manufacturer
Typical Applications
- Off-line spray-in-air stencil cleaners
- Selected ultrasonic-based stencil cleaners
- Stencil cleaning after removal from the stencil printer (removal of wet solder paste and uncured adhesive)
Process Note
AQUANOX A8820 is used as a concentrate diluted to a typical 25% operating concentration. Cleaning methods and parameters should be optimized according to machine and process; the manufacturer's laboratories offer process optimization and samples for verification.
Specifications
- Product name: AQUANOX A8820
- Manufacturer: KYZEN
- Part number: E01292
- Type: Concentrated Micro Cell Technology (MCT™) cleaning fluid for stencils
- Typical operating concentration: 25%
- Typical processes: Off-line spray-in-air and selected ultrasonic stencil cleaners
- Drying: Air; rinsing: optional
- Water solubility: Partial
- Boiling point: 291°F / 144°C
- VOC @ 10%: 88.5 g/L
- Packaging: 1 gallon, 5 liters, 5 gallons (25 liters), 55 gallons (200 liters)
- Shelf life: 5 years in sealed containers of 5 gallons / 25 liters or larger
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.