Product Overview
The Cembre A37-M14 is a ring terminal designed for crimp connection with copper conductors. This A-M type product is made of electrolytic copper with tin plating. The ring terminal has an M14 bolt hole (Ø 15 mm) and is equipped with a spy hole.Application and Assembly
This ring terminal is used to establish crimped connections between copper conductors and studs/bolts where a ring terminal is required. Assembly principle:- Select the correct cable cross-section and tool according to the manufacturer's table.
- Strip the conductor to the length recommended in the table and insert the conductor into the barrel.
- Apply the specified number of crimps, starting from the flat side of the tongue.
Material and Characteristics
The Cembre A37-M14 is annealed to provide increased ductility and is tin-plated for corrosion protection. The minimum thickness of the tin plating is stated as 3 μm in the manufacturer's documentation. The product is specified for use with copper conductors.Documentation
See datasheet from the manufacturerSpecifications
- Manufacturer: CEMBRE
- Product Name: Cembre A37-M14
- Type: A-M series, ring terminal (crimp-type)
- Wire Range: 150–185 mm² (low-stranded 150 mm²)
- Bolt Hole: M14 (Ø 15 mm)
- Inspection Hole: Yes (spy hole)
- Material: Electrolytic copper, tin-plated (min. 3 μm)
- Condition: Annealed
- Specified Operating Temperatures: minimum −50 °C, maximum +150 °C
- Approvals in Documentation: UL listed according to UL486A - 486B (up to 35 kV, File no. E125401)
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.