Product Overview
This Single-pole earthing and short-circuiting device from HORSTMANN is a single-pole earthing and short-circuiting device for temporary earthing of disconnected AC systems. The device consists of a highly flexible copper cable with cable lugs at both ends; each cable lug has a 13 mm hole. The product is listed under Horstmann article number 61-0105-010.
Design and Compliance
- Highly flexible copper cable with transparent insulation (as specified by the manufacturer).
- Cable lugs at both ends, each with a 13 mm hole.
- Specified for compliance with IEC 61230 (VDE 0683-100).
Typical Applications
The product is used for temporary earthing of disconnected AC systems and is intended for use in low and medium voltage installations, as specified by the manufacturer. The application follows the manufacturer's described work sequence: first, connect the earth potential connection to a fixed earthing point, then connect the phase connection to the part to be earthed. Disconnection occurs in the reverse order.
Important Notes
- The device must be dimensioned for the possible short-circuit current in the specific system; product features indicate a rated short-circuit current Ir of 18.7 kA (tr = 1 s) for this article.
- The earthing cable can be mounted with all terminals, according to the manufacturer's information.
Specifications
- Manufacturer: HORSTMANN
- Article number / manufacturer no.: 61-0105-010
- Product name: Single-pole earthing and short-circuiting device
- Copper cable cross-section: 95 mm²
- Rope length / cable length: 5000 mm
- Rated short-circuit current Ir: 18.7 kA (tr = 1 s)
- Cable lugs: at both ends, each with a 13 mm hole
- Standard: IEC 61230 (VDE 0683-100)
- Application area: For temporary earthing of disconnected AC systems; intended for low and medium voltage installations.
The information is based on the manufacturer's product description and technical table from HORSTMANN's product page.
The content is generated using AI – we reserve the right for errors.
Contact HIN for further information about the product.