GW-Instek MFG-2260M
The GW-Instek MFG-2260M is a two-channel arbitrary function generator for laboratories and development environments that require the creation and control of precise electrical signals. It is used when a stable test signal is needed for troubleshooting, verification, or characterization of electronics.
Each of the two channels can deliver common waveforms such as sine, square, and triangle/ramp, and can also work with user-defined waveforms. Sine waves go up to 60 MHz on both channels, square waves up to 25 MHz, and triangle/ramp waves up to 1 MHz. The frequency can be adjusted down to 1 μHz, allowing for very fine adjustments in the range between slow and very fast signals.
The ARB section uses a sample rate of 200 MSa/s, a waveform length of 16k points, and 14-bit amplitude resolution. In practice, this means that signals can be shaped with excellent control over details. There is also a built-in pulse generator with adjustable pulse width, duty cycle, and edges, which is useful for testing digital circuits or time-critical functions.
Outputs are 50 Ω, and the amplitude range extends from 1 mVpp to 10 Vpp into a 50 Ω load. It features short-circuit protection, and the output terminals have up to ±42 Vpk ground isolation. The instrument also has dual-channel function with phase adjustment, synchronization, frequency coupling, and the ability to save and recall settings.
The front panel features a 4.3" TFT LCD display, and the unit can be connected via USB or LAN. This makes it easy to integrate into a common professional test setup, where both manual operation and stored setups are part of daily work.
See datasheet from the manufacturer
Typical applications
- Testing and troubleshooting of analog and digital circuits
- Verification of electronics in development and laboratory environments
- Signal generation for measurement setups where frequency and waveform need precise control
- Tasks involving pulse, sweep, and modulation functions
Specifications
- Manufacturer: GW-INSTEK
- MPN: MFG-2260M
- Two channels: CH1/CH2
- Sine up to 60 MHz
- Square up to 25 MHz
- Triangle/Ramp up to 1 MHz
- Frequency resolution: 1 μHz
- ARB sample rate: 200 MSa/s
- Waveform length: 16k points
- Amplitude resolution: 14 bits
- Built-in pulse generator: 1 μHz to 25 MHz
- Pulse width: ≥20 ns
- Output impedance: 50 Ω
- Amplitude: 1 mVpp to 10 Vpp into 50 Ω
- Short-circuit protected output
- Ground isolation: up to ±42 Vpk
- USB and LAN interface
- Display: 4.3" TFT LCD 480 × 272
- Weight: approx. 2.5 kg
- Dimensions (WxHxD): 266 x 107 x 293 mm
- GTIN/EAN: not verified in the provided sources
Content generated with AI - we reserve the right for errors.
Contact HIN for further product information.