STAUBLI 32.0330 MC4-Evo 2 in-line fuse
STAUBLI 32.0330 is an in-line fuse for PV systems, where it is placed directly in the wiring and can interrupt the DC circuit in case of fault currents or overcurrents. It is thus used as a built-in fuse component in the solar cable system, so that the circuit can be protected where the current flows through the system.
This variant is designed for the MC4-Evo 2 system and is intended for cable cross-sections of 6 mm². It has a cable length of 59 cm, which provides flexibility during installation in a PV cable system. It is rated for DC 1500 V and 20 A, and it is TÜV Rheinland certified according to 2PfG 2380. This makes it relevant for installations where documented components and fixed requirements for safety and compatibility are essential.
In practice, it is a component used when a string needs its own in-line fuse, and where one wants to keep the installation coherent with original Stäubli MC4-Evo 2 components. It is also protected with IP65/IP68 (1 m, 1 h) in the mated condition and has a test voltage of 8 kV.
See datasheet from the manufacturer
Typical applications
- PV systems where DC circuits must be able to be interrupted in case of fault currents or overcurrents
- Cable systems with MC4-Evo 2 connection
- Installations where there are requirements for 6 mm² conductor cross-section and documented component selection
Specifications
- Manufacturer: STAUBLI
- MPN: 32.0330
- Product name: PV-K/1500ILF3-20/6E-0059
- DC rated voltage: 1500 V
- Rated current: 20 A
- Cable length: 59 cm
- Cable cross-section: 6 mm²
- Connector system: MC4-Evo 2
- Degree of protection in mated condition: IP65/IP68 (1 m, 1 h)
- Test voltage: 8 kV
- TÜV Rheinland certified according to 2PfG 2380
- Operating temperature: -40 °C to +50 °C
- Upper limit temperature: 115 °C
The content is generated with the help of AI - we reserve the right for errors.
Contact HIN for further information about the product.