Product Overview
The CEC 25/9 is an adhesive-lined, cross-linked polyolefin heat-shrink end cap designed for sealing and electrical insulation of cable ends. The product's thermoplastic adhesive liner creates a complete environmental seal around cable terminations, and the material's composition is detailed in the manufacturer's documentation.Features and Function
- Shrink ratio: >2:1
- Thermoplastic adhesive liner provides environmental sealing
- Continuous operating temperature: -40°C to 100°C
- Minimum shrink activation temperature: 125°C
Technical Documentation
See datasheet from the manufacturer
Typical Applications
- Sealing of cable ends against moisture and environmental influences.
- Electrical insulation of cable ends (stop-ends), where the product is specified to be rated up to 1000 V under load.
Specifications
- Product: CEC 25/9
- Manufacturer: DSG-Canusa
- Manufacturer's part number: C6460110BK00PC
- Material: cross-linked polyolefin, adhesive-lined (thermoplastic liner)
- Shrink ratio: >2:1
- Expanded inner diameter: 25.0 mm
- Recovered inner diameter: 9.0 mm
- Recommended diameter range: 10.0–22.0 mm
- Total wall thickness (nom.): 2.7 mm
- Min. length (as supplied): 70 mm
- Min. shrink temperature (activation): 125°C
- Continuous operating temperature: -40°C to 100°C
- Rated for 1000 V for stop-ends under load
- Dielectric strength: >12 kV/mm
- Tensile strength: 10 MPa
- Elongation: min. 300%
- Specific volume resistance: 1e12 Ω·cm
- Standards listed by manufacturer: IEC 62677, ESI 09-11
The content is generated using AI – subject to errors.
Contact HIN for further information about the product.