{"title":"GW Instek","description":"","products":[{"product_id":"gw-dds-funktions-gener-25mhz-1-kanals-am-fm-fsk-modulationsampling-20msa-s-sampling-20msa-s","title":"GW DDS funktions gener. 25MHz 1-kanals AM\/FM\/FSK Modulationsampling 20MSa\/s sampling 20MSa\/s","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW INSTEK AFG-2125\u003c\/h2\u003e\u003cp\u003eThe GW INSTEK AFG-2125 is a DDS-based arbitrary waveform function generator for building and testing signals in the laboratory and in electronics production. It is used when a controlled test signal is required instead of working with a fixed, natural signal from a circuit or sensor.\u003c\/p\u003e\u003cp\u003eIt can generate sine, square, ramp\/triangle, noise, and arbitrary waveforms. For sine, square, and triangle, the frequency range is from 0.1 Hz to 25 MHz, and the frequency can be set with 0.1 Hz resolution. This makes it easier to fine-tune signals when testing circuits, measuring responses, or simulating a specific signal form.\u003c\/p\u003e\u003cp\u003eThe unit has a 20 MSa\/s sample rate, 10-bit amplitude resolution, and 4k-point waveform memory for arbitrary signals. This means that users can work with their own waveforms and send them out through the main output with a 50 Ω output impedance. The amplitude is specified from 1 mVpp to 5 Vpp in 50 Ω, or 2 mVpp to 10 Vpp without load.\u003c\/p\u003e\u003cp\u003eOn the front, there is a 3.5\" LCD display, allowing settings and signal parameters to be read directly. There is also a USB device interface for remote control and for downloading waveform data from a PC. The modulation functions AM, FM, and FSK, as well as sweep, make it useful when the signal needs to be varied over time in a test setup.\u003c\/p\u003e\u003cp\u003eThe manufacturer's documentation also states that the AFG-2125 is supplied in the AFG-2100\/2000 series, and that the manufacturer provides a datasheet and software for waveform editing on a PC.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722026914135,"sku":"AFG-2125","price":3069.01,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_933c3879-2c60-4ee7-ae11-acc57a2ddb99.jpg?v=1747851091"},{"product_id":"gw-ac-stromforsyning-500va-155-310vrms-4-2-2-1a","title":"GW AC power supply 500VA, 155\/310Vrms, 4.2\/2.1A","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK APS-7050E\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK APS-7050E is a programmable AC power supply for testing and development, where a controllable AC voltage is needed instead of standard mains voltage. It delivers up to 500 VA and has two output ranges: 0~155 Vrms and 0~310 Vrms. The frequency can be set from 45 to 500 Hz, allowing various supply conditions to be handled with the same instrument.\u003c\/p\u003e\u003cp\u003eIn practice, it is used to test electronics under controlled conditions. This is relevant for component development, incoming quality control, and testing equipment that needs to operate stably at different voltages and frequencies. It also has a test mode and 10 preset settings, so fixed test setups can be saved and recalled.\u003c\/p\u003e\u003cp\u003eOn the front, there is a 4.3\" TFT-LCD screen, and the instrument displays voltage, current, power, peak current, frequency, and power factor, among other things. This makes it easier to monitor tests without additional measuring equipment. At the same time, it includes OCP, OPP, and OTP protection, safeguarding both the instrument and the device under test.\u003c\/p\u003e\u003cp\u003eThe APS-7050E is designed in a 2U format, allowing it to be integrated into a rack environment where space is often limited. Its low form factor makes it suitable for laboratories and test setups where multiple instruments need to fit in a small space.\u003c\/p\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/8494\/577\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eDevelopment and testing of electronic components\u003c\/li\u003e\n\n\u003cli\u003eIncoming quality control\u003c\/li\u003e\n\n\u003cli\u003eResearch and development\u003c\/li\u003e\n\n\u003cli\u003eTesting of power supplies and other electronic equipment\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: APS-7050E\u003c\/li\u003e\n\n\u003cli\u003ePower: 500 VA\u003c\/li\u003e\n\n\u003cli\u003eOutput voltage: 0~155 Vrms and 0~310 Vrms\u003c\/li\u003e\n\n\u003cli\u003eOutput frequency: 45~500 Hz\u003c\/li\u003e\n\n\u003cli\u003eMax. continuous RMS current: 4.2 A at low voltage range, 2.1 A at high voltage range\u003c\/li\u003e\n\n\u003cli\u003eMeasurement functions: voltage, current, power, peak current, frequency and power factor\u003c\/li\u003e\n\n\u003cli\u003eTest mode: 10 sets\u003c\/li\u003e\n\n\u003cli\u003ePreset settings: 10\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 4.3\" TFT-LCD\u003c\/li\u003e\n\n\u003cli\u003eProtection: OCP, OPP and OTP\u003c\/li\u003e\n\n\u003cli\u003eHeight: 2U (88 mm)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right to make errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722038350167,"sku":"APS-7050E","price":16538.72,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_f74d56e8-d6f3-4634-88b0-8a23484a70d6.jpg?v=1747851116"},{"product_id":"programmerbar-ac-dc-stromforsyning-1000-va","title":"Programmerbar AC\/DC strømforsyning 1000 VA","description":". \u003cp\u003eThe ASR-2000 series, an AC+DC power source aiming for system integration or desktop applications, provides both rated power output for AC output and rated power output for DC output.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722044379479,"sku":"ASR-2100R","price":36234.74,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_e207eecd-e22f-4179-bff6-f5086ca8b0d6.jpg?v=1747851125"},{"product_id":"gw-instek-ac-40a-ground-bond-tester","title":"GW INSTEK AC 40A Ground Bond Tester","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW INSTEK GCT-9040\u003c\/h2\u003e\u003cp\u003eThe GW INSTEK GCT-9040 is an AC ground bond tester for checking earth connections in safety tests. It is used to measure whether a protective earth or ground connection has sufficiently low resistance to safely conduct a high current. The test current can reach 40 A, and resistance is measured in the range of 1 mΩ to 650 mΩ.\u003c\/p\u003e\u003cp\u003eThis makes it relevant in environments where equipment must be properly grounded and where clear and repeatable connection verification is required. The instrument can be used as a standalone unit, but it can also be connected to the GPT-9000 series safety testers, such as the GPT-9800 and GPT-9900. This allows for combined or simultaneous tests and integrated control of functions.\u003c\/p\u003e\u003cp\u003eFor the user, this means a more flexible test station setup. The front panel features a 240x64 dot-matrix LCD, and the unit can store up to 100 manual test settings, allowing fixed test setups to be recalled. For integration into a test environment, it includes a USB device port, signal I\/O, and GPIB capability.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eContent generated with AI – subject to errors.\u003cbr\u003eContact HIN for further product information.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722282897751,"sku":"GCT-9040","price":14545.37,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_e6fb5e28-6b27-4a23-97e6-fb634a804fe8.jpg?v=1747851936"},{"product_id":"gw-bord-multimeter-20a-ac-dc-1000v-ac-dc-diode-cap-frek-cat-ii-1200v-cat-iii-600v","title":"GW table multimeter 20A AC\/DC 1000V AC\/DC diode\/cap.\/freq. CAT II 1200V \/ CAT III 600V","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eBench-top digital multimeter GDM-8245\u003c\/h2\u003e\n\u003ch3\u003eWhat it is\u003c\/h3\u003e\nThe GDM-8245 from GW‑INSTEK is a bench-top digital multimeter with 50,000 counts and a dual 7-segment LED display. The instrument's functions and specified measurement methods are directly stated in the manufacturer's product text and data sheet.\n\n\u003ch3\u003eWhat it measures and how\u003c\/h3\u003e\nThe GDM-8245 measures DC and AC voltage, DC and AC current, resistance, capacitance, frequency, continuity (beeper), diode, and dBm. AC measurements can be performed as True RMS, either as AC only or as AC+DC True RMS. The instrument offers both manual and automatic ranging and has functions for Max\/Min, Relative (REL), and Hold.\n\n\u003cul\u003e\n\n  \u003cli\u003eDisplay: Dual 7-segment LED (two sizes specified in the datasheet)\u003c\/li\u003e\n\n  \u003cli\u003eRanging: Manual or auto-ranging\u003c\/li\u003e\n\n  \u003cli\u003eMeasured parameters: DCV, ACV (True RMS), DCA, ACA (True RMS), R, C, Hz, continuity, diode, dBm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003ePractical details\u003c\/h3\u003e\nThe GDM-8245 has voltage ranges up to 1000 V and can accept current up to 20 A on the high-current range, according to the manufacturer's specifications. AC measurements support frequencies up to 50 kHz. The instrument comes with a power cord and a test lead type specified by the manufacturer for use with the model.\n\n\u003cp\u003eDocumentation: \u003ca href=\"https:\/\/www.gwinstek.com\/zh-TW\/products\/downloadSeriesDownNew\/9697\/683\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct name: GDM-8245\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: GW‑INSTEK\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: 50,000 counts, dual 7-segment LED\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement functions: DCV, ACV (AC or AC+DC True RMS), DCA, ACA, resistance, capacitance, frequency, continuity (beeper), diode, dBm\u003c\/li\u003e\n\n  \u003cli\u003eRanging: Manual or automatic\u003c\/li\u003e\n\n  \u003cli\u003eDCV accuracy: 0.03% (specified in the datasheet)\u003c\/li\u003e\n\n  \u003cli\u003eVoltage ranges: up to 1000 V (five voltage ranges specified)\u003c\/li\u003e\n\n  \u003cli\u003eCurrent: up to 20 A (high-current range)\u003c\/li\u003e\n\n  \u003cli\u003eAC measurement frequency range: up to 50 kHz\u003c\/li\u003e\n\n  \u003cli\u003eFunctions: Max\/Min, REL, Hold\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: AC 100\/120\/230 V ±10%, 50\/60 Hz\u003c\/li\u003e\n\n  \u003cli\u003eAccessories: User manual, power cord, test lead GTL-117 (specified in the datasheet)\u003c\/li\u003e\n\n  \u003cli\u003eDimensions and weight: 251 x 91 x 291 mm, approx. 2.6 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right to make errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722282996055,"sku":"GDM-8245","price":3069.56,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_38fe80e4-0586-4ddc-a676-6e4ea5bb9d64.jpg?v=1747851936"},{"product_id":"gw-ds-oscilloscope-2ch-100mhz-1gsa-s-usb-10m-memory-ch","title":"GW-DS Oscilloscope 2CH 100MHz 1GSa\/s - USB - 10M memory CH","description":". \u003cp\u003e7 ”TFT color display. Max. input 300V Sampling: real-time 1GSa \/ s Interface USB (cable not included) 10: 1\/1: 1 probe included.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722283258199,"sku":"GDS-1102B","price":5514.06,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_ffc555f8-114d-4da3-b8c0-25a7ef7f1d50.jpg?v=1747851939"},{"product_id":"gw-ds-oscilloscope-4ch-100mhz-1gsa-s-usb-10m-memory-ch-7-tft-farve-skaerm","title":"GW-DS Oscilloscope 4CH 100MHz 1GSa\/s - USB - 10M memory CH 7 TFT color screen","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GDS-1104B\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GDS-1104B is a digital storage oscilloscope with four channels and 100 MHz bandwidth. It is used to view and analyze electrical signals over time and simultaneously monitor multiple signals. In practice, it is a measuring instrument for troubleshooting, developing, and inspecting electronics where it is necessary to understand signal shape, timing, and progression.\u003c\/p\u003e\u003cp\u003eWith up to 1 GSa\/s real-time sampling rate and a maximum memory depth of 10 Mpts per channel, the instrument can store long signal sequences and display details that might otherwise be easily lost. The 7\" WVGA color screen provides a good overview, and a waveform update rate of up to 50,000 waveforms per second makes it easier to capture rapid changes and transient errors.\u003c\/p\u003e\u003cp\u003eFor many workshops and development benches, it is also practical that the oscilloscope can work with serial buses such as I2C, SPI, UART, CAN, and LIN. This means that it can both trigger on and decode signals from common communication lines. The built-in FFT function is used when the signal needs to be viewed in the frequency domain instead of just as a time-domain waveform.\u003c\/p\u003e\u003cp\u003eConnections include USB 2.0 host, USB device for remote control, and an RJ-45 Ethernet port for the four-channel models. This makes it easier to integrate the instrument into a professional measurement environment where data needs to be shared or controlled from a PC.\u003c\/p\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/1741\/133\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eTroubleshooting and measurement in electronic circuits\u003c\/li\u003e\n\n\u003cli\u003eDevelopment and testing in R\u0026amp;D environments\u003c\/li\u003e\n\n\u003cli\u003eEducation and general measurement tasks\u003c\/li\u003e\n\n\u003cli\u003eAnalysis of serial buses such as I2C, SPI, UART, CAN, and LIN\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GDS-1104B\u003c\/li\u003e\n\n\u003cli\u003eChannels: 4\u003c\/li\u003e\n\n\u003cli\u003eBandwidth: 100 MHz\u003c\/li\u003e\n\n\u003cli\u003eMax. real-time sampling rate: 1 GSa\/s\u003c\/li\u003e\n\n\u003cli\u003eMax. record length: 10 Mpts per channel\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 7\" 800 × 480 WVGA color TFT LCD\u003c\/li\u003e\n\n\u003cli\u003eWaveform update rate: up to 50,000 wfms\/s\u003c\/li\u003e\n\n\u003cli\u003eSerial bus trigger\/decoding: I2C, SPI, UART, CAN, and LIN\u003c\/li\u003e\n\n\u003cli\u003eFFT display: 1 Mpts\u003c\/li\u003e\n\n\u003cli\u003eUSB 2.0 high-speed host port\u003c\/li\u003e\n\n\u003cli\u003eUSB device port for remote control\u003c\/li\u003e\n\n\u003cli\u003eRJ-45 10\/100 Mbps Ethernet port\u003c\/li\u003e\n\n\u003cli\u003eEAN\/GTIN: not stated in the verified data\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated with AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further product information.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722283356503,"sku":"GDS-1104B","price":8083.29,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_64530bc4-e846-4d33-8d35-3add0d6bdb57.jpg?v=1747851939"},{"product_id":"gw-ds-oscilloscop-100mhz-2-ch-2gsa-s-rts-100gsa-s-ets","title":"GW-DS Oscilloscope 100MHz 2-CH 2GSa\/s (RTS) \/ 100GSa\/s (ETS)","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GDS-2102A\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GDS-2102A is a digital oscilloscope with 2 channels and a bandwidth of 100 MHz. In practice, it is used to view and measure electrical signals when you want to monitor how a circuit behaves over time. This makes it easier to find faults, check signal forms, and compare what you expect with what actually happens.\u003c\/p\u003e\u003cp\u003eWith up to 2 GSa\/s in real-time sampling and up to 2 M points of record length, you can both capture fast events and save a longer signal trace for later analysis. The high waveform update rate of up to 80,000 waveforms per second means that changes in the signal are displayed quickly on the screen, giving a more vivid picture of what is going on.\u003c\/p\u003e\u003cp\u003eThe oscilloscope has an 8\" SVGA TFT LCD screen with 800 x 600 resolution. Vertical sensitivity ranges from 1 mV\/div to 10 V\/div, and the time base from 1 ns\/div to 100 s\/div. This provides a wide working area when working with both small signals and longer traces. Additionally, the model features serial bus trigger and analysis for I\u003csup\u003e2\u003c\/sup\u003eC, UART, and SPI, which is relevant when working with low-speed digital systems.\u003c\/p\u003e\u003cp\u003eConnections include standard RS-232C, USB, and Go\/NoGo output. Ethernet, SVGA video, and GPIB are available as options. An 8 or 16 digital channel logic analyzer function can also be added as a plug-in module.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesDownNew\/1018\/94\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cp\u003eThe GDS-2102A is well-suited for development, testing, troubleshooting, and service work where there is a need to measure and analyze analog signals and smaller digital buses.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GDS-2102A\u003c\/li\u003e\n\n\u003cli\u003eType: digital storage oscilloscope\u003c\/li\u003e\n\n\u003cli\u003eChannels: 2\u003c\/li\u003e\n\n\u003cli\u003eBandwidth: 100 MHz\u003c\/li\u003e\n\n\u003cli\u003eMax. real-time sampling: 2 GSa\/s\u003c\/li\u003e\n\n\u003cli\u003eMax. equivalent-time sampling: 100 GSa\/s\u003c\/li\u003e\n\n\u003cli\u003eMax. record length: 2 M points\u003c\/li\u003e\n\n\u003cli\u003eWaveform update rate: up to 80,000 waveforms per second\u003c\/li\u003e\n\n\u003cli\u003eScreen: 8\" TFT LCD\u003c\/li\u003e\n\n\u003cli\u003eScreen resolution: 800 x 600 pixels\u003c\/li\u003e\n\n\u003cli\u003eVertical sensitivity: 1 mV\/div to 10 V\/div\u003c\/li\u003e\n\n\u003cli\u003eTime base: 1 ns\/div to 100 s\/div\u003c\/li\u003e\n\n\u003cli\u003eSerial bus trigger and analysis: I\u003csup\u003e2\u003c\/sup\u003eC, UART, SPI\u003c\/li\u003e\n\n\u003cli\u003eStandard interface: RS-232C, USB, Go\/NoGo output\u003c\/li\u003e\n\n\u003cli\u003eOptions: Ethernet, SVGA video output, GPIB\u003c\/li\u003e\n\n\u003cli\u003eLogic analyzer function: 8 or 16 digital channels as an option\u003c\/li\u003e\n\n\u003cli\u003eDatasheet URL: https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesDownNew\/1018\/94\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content has been generated using AI - we reserve the right to make errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722283520343,"sku":"GDS-2102A","price":12919.81,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_0ae117f6-713a-49d7-9269-6181fda37236.jpg?v=1747851940"},{"product_id":"gw-instek-300-mhz-4-kanals-oscilloscope","title":"GW INSTEK 300 MHz, 4 channel Oscilloscope","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GDS-2304A\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GDS-2304A is a 4-channel digital storage oscilloscope with a 300 MHz bandwidth. In practice, it is used to view and analyze electrical signals, allowing users to monitor how a circuit behaves over time. It is therefore a tool suitable for troubleshooting, signal analysis, and electronics development.\u003c\/p\u003e\u003cp\u003eThis oscilloscope offers up to 2 GSa\/s real-time sampling and a memory depth of 2 Mega-points. This makes it possible to capture fast events while retaining enough signal data to zoom in and examine details afterwards. The 8\" TFT screen with 800 x 600 resolution provides a good overview of both waveforms and measurements.\u003c\/p\u003e\u003cp\u003eThe GDS-2304A also features functions useful when working with more complex signals. Segmented memory can be divided into up to 2048 sections, and waveform search helps locate specific events in the captured signal. This is particularly relevant when searching for short faults, glitches, or other sporadic events that might otherwise be difficult to find.\u003c\/p\u003e\u003cp\u003eThe front panel and built-in interface options make the instrument suitable for a professional work environment where local measurements are needed, and data needs to be processed practically.\u003c\/p\u003e\u003ch3\u003eTypical applications\u003c\/h3\u003e\u003cul\u003e\n\n\u003cli\u003eTroubleshooting electronic circuits\u003c\/li\u003e\n\n\u003cli\u003eSignal analysis in development and testing\u003c\/li\u003e\n\n\u003cli\u003eInvestigation of short events and irregular signals\u003c\/li\u003e\n\n\u003cli\u003eWorking with analog and digital signals in laboratory and development environments\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GDS-2304A\u003c\/li\u003e\n\n\u003cli\u003e4-channel digital storage oscilloscope\u003c\/li\u003e\n\n\u003cli\u003eBandwidth: 300 MHz\u003c\/li\u003e\n\n\u003cli\u003eReal-time sampling: up to 2 GSa\/s\u003c\/li\u003e\n\n\u003cli\u003eEquivalent-time sampling: up to 100 GSa\/s\u003c\/li\u003e\n\n\u003cli\u003eRecord length: 2 Mega-points\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 8\" TFT LCD, 800 x 600\u003c\/li\u003e\n\n\u003cli\u003eVertical sensitivity: 1 mV\/div to 10 V\/div\u003c\/li\u003e\n\n\u003cli\u003eTime base: 1 ns\/div to 100 s\/div\u003c\/li\u003e\n\n\u003cli\u003eSegmented memory: up to 2048 sections\u003c\/li\u003e\n\n\u003cli\u003eWaveform search: yes\u003c\/li\u003e\n\n\u003cli\u003eDATABLAD_URL: \u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesDownNew\/1029\/94\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content has been generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722283716951,"sku":"GDS-2304A","price":15315.82,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_58a4b5ec-4375-445a-b592-61f895b1940c.jpg?v=1747851940"},{"product_id":"kabel-set-for-9800-serien","title":"Cable set for 9800 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGHT-108 H.V. Wiring Lead\u003c\/h2\u003e\u003cp\u003eThe GHT-108 is a high-voltage lead from GW Instek, used as a connection lead in their scanner boxes for safety testing. It is part of the internal setup for the GSB-01 and GSB-02, where it connects to the high-voltage side. According to the manufacturer's information, it is approximately 500 mm long.\u003c\/p\u003e\u003cp\u003eIn practice, this means that the lead functions as a specially adapted spare part or accessory in a test setup where high voltage, insulation resistance, or ground bond testing is performed. It is not intended as a general-purpose lead for ordinary electrical or laboratory use, but as part of the original GW Instek accessories for the scanner boxes.\u003c\/p\u003e\u003cp\u003eThe GHT-108 is specified for use with the GSB-01 and GSB-02. This makes it relevant when maintaining or assembling a complete and correctly functioning test system for the GPT-9800\/9900\/9900A series.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/10873\/853\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW Instek\u003c\/li\u003e\n\n\u003cli\u003eMPN: GHT-108\u003c\/li\u003e\n\n\u003cli\u003eProduct: H.V. Wiring Lead\u003c\/li\u003e\n\n\u003cli\u003eExpected length: approx. 500 mm\u003c\/li\u003e\n\n\u003cli\u003eCompatible with: GSB-01 and GSB-02\u003c\/li\u003e\n\n\u003cli\u003eSpecified as included part for: GSB-01\/02 scanner box\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated by AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722283848023,"sku":"GHT-108","price":220.13,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_a7863503-5cdf-4dac-8ad5-39d087a02191.jpg?v=1747851941"},{"product_id":"kabel-set-for-9800-serien-1","title":"Cable set for 9800 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GHT-109\u003c\/h2\u003e\u003cp\u003eThe GHT-109 is a ground bond lead used with GW Instek's GSB-02 multiplex scanner box. It is a connection cable for ground bond testing, meaning it is the part of the connection setup required when correctly introducing the ground connection into the measurement setup.\u003c\/p\u003e\u003cp\u003eThe lead is specified as a standard accessory for the GSB-02 and is intended for use when the scanner box is connected to a GPT-9800, GPT-9900, or GPT-9900A safety tester system. In the manual, it is listed as the GB wiring lead to be used for wiring the GSB-02. Its length is approximately 450 mm, making it suitable for the fixed setup around the scanner box and tester.\u003c\/p\u003e\u003cp\u003eIn practice, the GHT-109 is relevant when working with safety tests in a professional setup where multiple measurement points need to be controlled via the scanner box. In such cases, it is crucial that the ground bond connection is correct and compatible with the equipment's design. This is precisely the role this lead plays.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-GB\/products\/downloadSeriesDownNew\/10863\/855\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's datasheet\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GHT-109\u003c\/li\u003e\n\n\u003cli\u003eProduct type: G.B. wiring lead \/ ground bond lead\u003c\/li\u003e\n\n\u003cli\u003eApplication: For GSB-02 multiplex scanner box\u003c\/li\u003e\n\n\u003cli\u003eCompatible with: GPT-9800, GPT-9900, and GPT-9900A safety testers via GSB-02\u003c\/li\u003e\n\n\u003cli\u003eLength: approx. 450 mm\u003c\/li\u003e\n\n\u003cli\u003eStandard accessory: Yes, for GSB-02\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated with the help of AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722284044631,"sku":"GHT-109","price":58.01,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_db2c01dc-75b3-4d46-ba38-a0019298d09d.jpg?v=1747851942"},{"product_id":"gw-hv-test-ledning-f-gpt-9xxx","title":"GW-HV test lead f\/GPT-9xxx","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GHT-114\u003c\/h2\u003e\u003cp\u003eThe GHT-114 is a high-voltage test lead for GW Instek safety testers. It is used as part of the measurement setup to connect a GPT series tester to the item under test. In practice, it is the lead used when a safe and clear connection is required during high-voltage testing.\u003c\/p\u003e\u003cp\u003eThe length is approximately 1000 mm, providing an appropriate working distance for testing. The lead is listed as an accessory for the GPT-9900, GPT-9800, and GPT-9600 series and also appears in GW Instek's accessories index under General Lead. It is supplied as a test lead included as standard accessory with the aforementioned GPT models.\u003c\/p\u003e\u003cp\u003eFor those who work with electrical safety testing, this is a spare part or replacement lead to keep equipment complete and ready for use. It belongs to the part of the setup where the connection for the test must be stable and adapted for high-voltage measurements.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/detail\/GHT-114\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eFor electrical safety tests with GPT-9900, GPT-9800, and GPT-9600 series\u003c\/li\u003e\n\n\u003cli\u003eAs an accessory in a high-voltage measurement setup\u003c\/li\u003e\n\n\u003cli\u003eAs a replacement for a supplied test lead\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GHT-114\u003c\/li\u003e\n\n\u003cli\u003eProduct type: High voltage test lead\u003c\/li\u003e\n\n\u003cli\u003eLength: approx. 1000 mm\u003c\/li\u003e\n\n\u003cli\u003eCompatibility: GPT-9900A\/9900\/9800\/9600 Series\u003c\/li\u003e\n\n\u003cli\u003eGTIN\/EAN: not disclosed in verified data\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content has been generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722284142935,"sku":"GHT-114","price":232.02,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_bd84bb2b-a432-4cc6-b5b6-112e221f96b7.jpg?v=1747851943"},{"product_id":"testledning-ght-115-gpt-10000-opt","title":"Test lead GHT-115, GPT-10000 OPT","description":". \u003cp\u003eHigh Voltage \/ Continuity Test Lead, Approx. 1000mm\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722284339543,"sku":"GHT-115","price":347.12,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_477b6a31-7b22-4977-ad3a-fc130fb7a2af.jpg?v=1747851944"},{"product_id":"gw-hv-test-probe-f-gsp-8xx-gpt-9xxx-serierne","title":"GW-HV test probe f\/GSP-8xx + GPT-9xxx serierne","description":"\u003cp\u003e. Good Will Instrument GHT-205. Product type: Test lead, Color of product: Multicolor, Interface: Banana plug. Length: 41 cm, Width: 110 mm, Height: 100 mm\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722284470615,"sku":"GHT-205","price":812.78,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_cc2d8508-07c5-4862-9f19-0ec6b2fdbafb.jpg?v=1747851945"},{"product_id":"gw-milli-ohm-meter-50m-ohm-5mohm","title":"GW-Milli Ohm Meter 50m Ohm-5MOhm","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eDC milli-ohm meter\u003c\/h2\u003e\n\u003cp\u003eThis DC milli-ohm meter from GW‑INSTEK, model GOM-804, is specifically designed for precise low-resistance measurement. The manufacturer states that the GOM-804 has a maximum display of 50,000 counts and uses a 3.5\" (320 x 240) TFT LCD screen for result display and operational information.\u003c\/p\u003e\n\u003ch3\u003eMeasurement Precision and Functions\u003c\/h3\u003e\n\u003cp\u003eThe GOM-804 has a stated measurement accuracy of 0.05% at 1 A test current and a resolution of 0.1 µΩ. The instrument supports four-wire resistance measurement as well as temperature measurement with temperature compensation. The sampling rate is specified as 60 readings per second. Unit operation and settings memory are present, including 20 sets of panel settings.\u003c\/p\u003e\n\u003ch3\u003eInterfaces\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eUSB device\u003c\/li\u003e\n\n  \u003cli\u003eRS-232C\u003c\/li\u003e\n\n  \u003cli\u003eHandler\/Scan\/EXT I\/O (D-sub 25-pin for external control functions)\u003c\/li\u003e\n\n  \u003cli\u003eGPIB (optional for GOM-804)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eLow resistance measurement as specified by the manufacturer.\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement of contact resistance, for example, contact resistance in connectors, as mentioned in the manufacturer's product text.\u003c\/li\u003e\n\n  \u003cli\u003eTemperature-compensated resistance measurements where a temperature sensor and compensation are necessary.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eModel: GOM-804 (GW‑INSTEK)\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: 3.5\" (320 x 240) TFT LCD\u003c\/li\u003e\n\n  \u003cli\u003eResolution: 0.1 µΩ\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement accuracy: 0.05% at 1 A test current\u003c\/li\u003e\n\n  \u003cli\u003eTest current (stated reference): 1 A\u003c\/li\u003e\n\n  \u003cli\u003eDisplay range: up to 50,000 counts\u003c\/li\u003e\n\n  \u003cli\u003eFour-wire resistance measurement\u003c\/li\u003e\n\n  \u003cli\u003eTemperature measurement and temperature compensation\u003c\/li\u003e\n\n  \u003cli\u003eSampling: 60 readings per second\u003c\/li\u003e\n\n  \u003cli\u003ePanel settings: 20 sets of memory\u003c\/li\u003e\n\n  \u003cli\u003eInterface: USB device, RS-232C, Handler\/Scan\/EXT I\/O; GPIB as an option\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSource:\u003c\/strong\u003e Manufacturer's product page for GOM-804\/GOM-805 (GW‑INSTEK).\u003c\/p\u003e\n\n\u003cp\u003e\nThe content is generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288107863,"sku":"GOM-804","price":4622.69,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_06a9d7e3-c233-4c7b-b7c1-bdce8b60a0c5.jpg?v=1747851961"},{"product_id":"milli-ohm-meter-50mohm-5mohm-med-3-5-lcf-display-drive-modes-dc-dc-pulse-pwm-zero-interfa","title":"Milli-Ohm meter 50mOhm – 5MOhm. With 3.5 LCF display. Drive modes: DC+\/DC-, Pulse, PWM","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eDC milliohm meter from GW‑INSTEK\u003c\/h2\u003e\nThe GOM-805 is a DC milliohm meter in GW‑INSTEK's GOM-800 series. The instrument is designed for precise four-wire resistance measurement and includes functions for temperature measurement and temperature compensation, as specified by the manufacturer.\n\n\u003ch3\u003eFeatures and User Interface\u003c\/h3\u003e\nThe GOM-805 has a 3.5\" (320 × 240) TFT LCD screen with a 50,000-count display. The device offers high accuracy (stated as 0.05% precision) and supports fast sampling up to 60 readings per second. The test current is 1 A according to the manufacturer's product text.\n\n\u003ch3\u003eDrive Modes and Functionality\u003c\/h3\u003e\nA range of drive modes are documented for the GOM-805: DC+\/DC-, Pulsed, PWM, Zero, and Standby. The GOM-805 also includes \"Dry circuit\" functionality, which is listed separately for this model in the manufacturer's information.\n\n\u003ch3\u003eCommunication and I\/O\u003c\/h3\u003e\nAccording to the manufacturer, the GOM-805 comes with several interfaces: USB device port, RS-232C, a D-sub 25-pin Handler\/Scan\/EXT I\/O, and GPIB (GOM-805: standard, while GOM-804 is mentioned as a possible option).\n\nThe information in this product description is based on the manufacturer's product page for the GOM-805 from GW‑INSTEK.\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct Name: GOM-805\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: GW‑INSTEK\u003c\/li\u003e\n\n  \u003cli\u003eSeries: GOM-800\u003c\/li\u003e\n\n  \u003cli\u003eType: DC milliohm meter (four-wire measurement)\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: 3.5\" (320 × 240) TFT LCD, 50,000-count\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy: 0.05% (stated by the manufacturer)\u003c\/li\u003e\n\n  \u003cli\u003eSampling: Up to 60 readings\/second\u003c\/li\u003e\n\n  \u003cli\u003eTest current: 1 A\u003c\/li\u003e\n\n  \u003cli\u003eTemperature: Temperature measurement and temperature compensation (stated by the manufacturer)\u003c\/li\u003e\n\n  \u003cli\u003eDry circuit: Included (GOM-805)\u003c\/li\u003e\n\n  \u003cli\u003eDrive modes: DC+\/DC-, Pulsed, PWM, Zero, Standby\u003c\/li\u003e\n\n  \u003cli\u003eInterfaces: USB device, RS-232C, D-sub 25-pin Handler\/Scan\/EXT I\/O, GPIB (standard on GOM-805)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – subject to errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288173399,"sku":"GOM-805","price":7619.81,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_16d09c0a-957a-4bda-bb70-dcf5d068ac56.jpg?v=1747851961"},{"product_id":"gw-stromforsyning-3-kanals-ch1-2-0-32v-0-3a-ch3-5v-5a","title":"GW-Strømforsyning 3-kanals CH1+2: 0-32V\/0-3A CH3: 5V\/5A","description":null,"brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288304471,"sku":"GPE-3323","price":3367.41,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_787e1971-8427-4105-a459-68d3c9cac5af.jpg?v=1747851963"},{"product_id":"gw-effektmaler-rs-232-usb-device-and-host-lan","title":"GW Effektmåler RS-232\/USB device and host\/LAN","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPM-8310\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPM-8310 is a digital power meter for single-phase AC measurements in a 1P\/2W configuration. It is used to precisely and clearly measure and monitor voltage, current, and power in test setups and other professional electrical and electronics work.\u003c\/p\u003e\u003cp\u003eThe instrument works with both DC and an input bandwidth range from 0.1 Hz to 100 kHz. This means it can be used for measurements across a wide frequency range and simultaneously handles multiple types of signals. The display is a 5\" TFT LCD, showing measurements directly on the instrument, and offers both manual and automatic range selection.\u003c\/p\u003e\u003cp\u003eAdditionally, it can display waveforms for voltage, current, and power, and the instrument supports harmonic measurement and analysis up to the 50th order. This makes it useful not only for knowing a single value but also for understanding how the signal behaves. The GPM-8310 works with 25 different power-related measurement parameters, providing a comprehensive view of the electrical load.\u003c\/p\u003e\u003cp\u003eFor integration and control in a test environment, standard interfaces such as RS-232C, USB device\/host, LAN, and GPIB are available. This makes the instrument easy to incorporate into both local and more automated measurement setups.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesSpec\/2117\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eMeasurement of single-phase AC power in test setups\u003c\/li\u003e\n\n\u003cli\u003eAnalysis of voltage, current, and power in electronics production and laboratory environments\u003c\/li\u003e\n\n\u003cli\u003eMonitoring of harmonic influences and waveforms\u003c\/li\u003e\n\n\u003cli\u003eIntegration into setups via RS-232C, USB, LAN, or GPIB\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPM-8310\u003c\/li\u003e\n\n\u003cli\u003eType: Digital power meter for single-phase AC measurement (1P\/2W)\u003c\/li\u003e\n\n\u003cli\u003eInput bandwidth: DC, 0.1 Hz to 100 kHz\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 5\" TFT LCD\u003c\/li\u003e\n\n\u003cli\u003eA\/D converter: 16-bit\u003c\/li\u003e\n\n\u003cli\u003eMax. conversion rate: approx. 300 kHz\u003c\/li\u003e\n\n\u003cli\u003eHarmonic measurement and analysis: up to 50th order\u003c\/li\u003e\n\n\u003cli\u003eMeasurement parameters: 25 power-related parameters\u003c\/li\u003e\n\n\u003cli\u003eInterfaces: RS-232C, USB host\/device, LAN, GPIB\u003c\/li\u003e\n\n\u003cli\u003ePower supply: AC 100-240 V, 50-60 Hz\u003c\/li\u003e\n\n\u003cli\u003ePower consumption: 30 VA max.\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 268 x 107 x 379 mm (with bumpers)\u003c\/li\u003e\n\n\u003cli\u003eWeight: approx. 2.9 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288435543,"sku":"GPM-8310","price":11827.64,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/GPM-8310_B-2_600x417_20070216351.jpg?v=1769370676"},{"product_id":"gw-stromforsyning-2x0-30v-0-3a-digital-m-euro-jack-banan","title":"GW Strømforsyning 2X0-30V\/0-3A digital m\/EURO jack\/banan","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPS-2303\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPS-2303 is a linear DC power supply with two independent, isolated outputs. In practice, this means that you can work with two separate circuits on the same device without them unnecessarily affecting each other. Each channel can be adjusted from 0 to 30 V and from 0 to 3 A, making it suitable for many tasks in electronics work, testing, and development.\u003c\/p\u003e\u003cp\u003eIt is built for workbenches where stable power and a clear overview are needed. The front panel features three-digit LED displays that show voltage and current, and the output can be switched on and off with a separate ON\/OFF switch. This makes it easier to set the values before applying voltage to the item being worked on. Additionally, there is protection against overload and reverse polarity, so both the power supply and the load are better protected against incorrect connections.\u003c\/p\u003e\u003cp\u003eThe unit can also be used in series up to 60 V\/3 A and in parallel up to 30 V\/6 A, providing more flexibility when one channel is not enough. Automatic fan speed control helps keep noise down during operation. For some installations, optional European jack-type terminals can be chosen.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesDownNew\/8095\/1210\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eElectronics laboratories and development work\u003c\/li\u003e\n\n\u003cli\u003eTesting of circuits and prototypes\u003c\/li\u003e\n\n\u003cli\u003eWorkstations requiring two separate DC outputs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPS-2303\u003c\/li\u003e\n\n\u003cli\u003eType: Linear DC power supply with 2 channels\u003c\/li\u003e\n\n\u003cli\u003eOutputs: 2 independent, isolated outputs\u003c\/li\u003e\n\n\u003cli\u003eVoltage per channel: 0 to 30 V\u003c\/li\u003e\n\n\u003cli\u003eCurrent per channel: 0 to 3 A\u003c\/li\u003e\n\n\u003cli\u003eRated power: 180 W\u003c\/li\u003e\n\n\u003cli\u003eSeries operation: up to 60 V \/ 3 A\u003c\/li\u003e\n\n\u003cli\u003eParallel operation: up to 30 V \/ 6 A\u003c\/li\u003e\n\n\u003cli\u003eFront panel: three-digit LED displays for voltage and current\u003c\/li\u003e\n\n\u003cli\u003eOperation: output ON\/OFF switch\u003c\/li\u003e\n\n\u003cli\u003eProtection: overload and reverse-polarity protection\u003c\/li\u003e\n\n\u003cli\u003eCooling: automatic fan speed control\u003c\/li\u003e\n\n\u003cli\u003eConnection: optional European jack-type terminals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288533847,"sku":"GPS-2303","price":3069.56,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_26180e98-e5b3-4e0e-8325-ac3b45135b25.jpg?v=1747851964"},{"product_id":"gw-stromforsyning-4-kanals-ch1-ch2-0-30v-0-3a","title":"GW strømforsyning 4-kanals CH1+CH2 0-30V\/0-3A","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPS-4303\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPS-4303 is a 4-channel linear DC laboratory power supply for benchtop use. It is used when multiple stable voltages are needed from the same unit, for example, in the development, testing, and troubleshooting of electronic circuits. Two of the channels can be adjusted from 0 to 30 V and 0 to 3 A each, while the other two channels provide fixed low-voltage outputs of 2.2 to 5.2 V and 8 to 15 V, respectively, with up to 1 A.\u003c\/p\u003e\u003cp\u003eWhat is special about the GPS-4303 is that channels 1 and 2 can be used together in tracking. They can be connected in series up to 0-60 V or in parallel up to 0-6 A. This makes it easier to work with both higher voltage and higher current without needing separate power supplies.\u003c\/p\u003e\u003cp\u003eAs a linear power supply, it is well-suited when a stable output with low ripple and noise is desired. For channels 1 and 2, line regulation is stated as ≤0.01% + 3 mV, and ripple \u0026amp; noise is ≤1 mVrms. These are relevant figures in a laboratory where small variations can impact measurement results and test runs.\u003c\/p\u003e\u003cp\u003eThe front is designed for practical use at the workbench, and the unit measures 255 × 145 × 265 mm with a weight of approximately 7 kg. It is powered by AC 100V\/120V\/220V ±10% or 230V (+10% to -6%), 50\/60 Hz.\u003c\/p\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cp\u003eThe GPS-4303 is typically used in electronics production, development departments, service, and test environments where multiple DC voltages are needed for the same setup.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPS-4303\u003c\/li\u003e\n\n\u003cli\u003e4-channel linear DC laboratory power supply\u003c\/li\u003e\n\n\u003cli\u003eTotal output power: 200 W\u003c\/li\u003e\n\n\u003cli\u003eCH1\/CH2: 0–30 V \/ 0–3 A each\u003c\/li\u003e\n\n\u003cli\u003eCH3: 2.2–5.2 V \/ 0–1 A\u003c\/li\u003e\n\n\u003cli\u003eCH4: 8–15 V \/ 0–1 A\u003c\/li\u003e\n\n\u003cli\u003eTracking series for CH1\/CH2: up to 0–60 V\u003c\/li\u003e\n\n\u003cli\u003eTracking parallel for CH1\/CH2: up to 0–6 A\u003c\/li\u003e\n\n\u003cli\u003eLine regulation for CH1\/CH2: ≤0.01% + 3 mV\u003c\/li\u003e\n\n\u003cli\u003eRipple \u0026amp; noise for CH1\/CH2: ≤1 mVrms (5 Hz–1 MHz)\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 255 × 145 × 265 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: approx. 7 kg\u003c\/li\u003e\n\n\u003cli\u003eDatasheet: \u003ca href=\"https:\/\/www.gwinstek.com\/en-GB\/products\/downloadSeriesSpec\/1205\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further product information.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722288959831,"sku":"GPS-4303","price":3756.28,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_4b60777f-91e2-40a2-a654-aa9dd9357f43.jpg?v=1747851966"},{"product_id":"gw-safety-tester-200va-ac-acw-dc-gc","title":"GW-Safety Tester 200VA AC ACW\/DC\/GC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-12002\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-12002 is an electrical safety analyzer instrument for testing insulation and withstand voltage. In practice, it is used to check whether a product can withstand high voltage without breakdown or unwanted leakage current. This is precisely the type of measurement needed in electronics production and for final testing of equipment where safety must be documented.\u003c\/p\u003e\u003cp\u003eThe instrument belongs to the GPT-12000 series and combines AC and DC withstand in the same unit. The AC test goes up to 5,000 kV, while the DC test goes up to 6,000 kV. In addition, it can measure insulation resistance with the voltage ranges specified in the specifications. The screen is a 7” color LCD, allowing setup and readout to be handled directly on the instrument.\u003c\/p\u003e\u003cp\u003eWhen testing high-voltage products, it is important that the measurement can be precisely controlled. Here, the GPT-12002 has features such as true RMS AC-current measurement, ARC detect, controlled ramp-up and ramp-down, and timer functions. This makes it easier to run repeated test sequences in a consistent manner. The maximum short-circuit current is specified as 10 mA, and the standard interfaces include RS-232C, USB host\/device, and Signal I\/O. There is also a rear output, while GPIB or LAN can be obtained as an option.\u003c\/p\u003e\u003cp\u003eThe front connection and memory functions make it suitable when multiple test sequences need to be saved and reused in a professional test setup.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content has been generated with the help of AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289058135,"sku":"GPT-12002","price":15675.01,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_effc9cad-84c9-42a6-84b8-a589e49fc061.jpg?v=1747851967"},{"product_id":"gw-safety-tester-5kv-ac","title":"GW safety tester 5kV AC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9601\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9601 is an AC withstand voltage tester for safety testing of equipment and components. It is used to check if a device can withstand a high AC voltage for a test period without breakdown or undesirable effects. In practice, it is a type of safety tester suitable for routine testing and production testing where electrical safety is required.\u003c\/p\u003e\u003cp\u003eThe model operates with an AC test voltage range from 0.10 kV to 5.00 kV AC and has a maximum output capacity of 100 VA. The maximum test current is 20 mA at voltages above 0.5 kV. During the test, the instrument can use ARC detection, true RMS current measurement, and zero-crossing turn-on, which helps with a more controlled start-up of the high voltage. In addition, there is a configurable safety interlock to enhance safety during daily operation.\u003c\/p\u003e\u003cp\u003eThe display is a 240 × 48 ice-blue dot-matrix LCD, making it easier to monitor voltage, measured value, and test results during the process. This is a practical detail when tests need to be run consistently and documented clearly.\u003c\/p\u003e\u003cp\u003eThe GPT-9601 comes with a power cord, interlock key, remote terminal cable GHT-119, and test lead GHT-114. It also includes an option for remote control via the remote terminal and signal I\/O.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content was generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289156439,"sku":"GPT-9601","price":7838.5,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_004e7935-43df-43aa-ab91-0a8c1da5fce9.jpg?v=1747851968"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc","title":"GW safety tester 5kV AC\/6kV DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eAC\/DC Withstanding Voltage Tester\u003c\/h2\u003e\n\u003ch3\u003eProduct Overview\u003c\/h3\u003e\nThe GPT-9602 from GW-INSTEK is an AC\/DC withstanding voltage tester designed to perform controlled withstand voltage tests. The device is part of the GPT-9600 series and offers both AC and DC withstand testing functions as confirmed by the manufacturer's documentation.\n\n\u003ch3\u003eWhat it Does\u003c\/h3\u003e\nThe GPT-9602 generates a regulated high-voltage output to verify insulation durability and withstand voltage capabilities. The device supports AC output in the range of 0.10 kV to 5.00 kV and DC output in the range of 0.10 kV to 6.00 kV, and the platform specification indicates an AC test capacity of 100 VA. The instrument includes features such as RMS current measurement, ARC detection, zero crossing turn-on, and a PWM switching amplifier for stable output.\n\n\u003ch3\u003eOperation and Connectivity\u003c\/h3\u003e\nThe front panel features a 240 x 48 dot matrix LCD for displaying test parameters and measured values, as well as colored LED indicators for status. There is an interlock function, a remote terminal on the front panel, and signal I\/O on the rear for remote control, as documented in the manufacturer's specifications. Standard accessories include a power cord, interlock key, remote terminal cable, and a test lead.\n\n\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/10679\/817\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's datasheet\u003c\/a\u003e\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eInformation Technology Equipment (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n  \u003cli\u003eConsumer Products (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n  \u003cli\u003eR.L.C. Component Testing (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n  \u003cli\u003eOther AC\/DC Withstanding tests where cutoff current is lower than 20 mA AC or 5 mA DC (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n  \u003cli\u003eModel: GPT-9602\u003c\/li\u003e\n\n  \u003cli\u003eFunction: AC and DC withstanding voltage tester\u003c\/li\u003e\n\n  \u003cli\u003eAC output range: 0.10 kV ~ 5.00 kV (AC)\u003c\/li\u003e\n\n  \u003cli\u003eDC output range: 0.10 kV ~ 6.00 kV (DC)\u003c\/li\u003e\n\n  \u003cli\u003eAC test capacity: 100 VA\u003c\/li\u003e\n\n  \u003cli\u003eDisplay: 240 x 48 Ice Blue dot matrix LCD\u003c\/li\u003e\n\n  \u003cli\u003eRMS current measurement: indicated in manufacturer's documentation\u003c\/li\u003e\n\n  \u003cli\u003eARC detection: yes (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n  \u003cli\u003eZero crossing turn-on: yes (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n  \u003cli\u003ePWM switching amplifier for enhanced efficiency and stability control: indicated in manufacturer's documentation\u003c\/li\u003e\n\n  \u003cli\u003eUniversal input: AC 100V~120V \/ 220V~240V ±10%, 50\/60 Hz\u003c\/li\u003e\n\n  \u003cli\u003eStandard accessories: power cord, interlock key, remote terminal cable, and test lead (indicated in manufacturer's documentation)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – we reserve the right to make errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289254743,"sku":"GPT-9602","price":9023.39,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_4d878fd0-777d-4e54-9275-3389abcef996.jpg?v=1747851969"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-isolationstest-50-1000v","title":"GW safety tester 5kV AC\/6kV DC Isolationstest 50-1000V","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9603\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9603 is a safety tester for high voltage testing and insulation measurement in one unit. It is used to check whether an item can withstand voltage without breakdown, and whether the insulation maintains the expected resistance in practice. This makes it suitable for test environments where systematic safety control of electrical equipment and components is carried out.\u003c\/p\u003e\u003cp\u003eThree measurement functions are combined here: AC withstand, DC withstand, and insulation resistance. The AC test ranges from 0.10 kV to 5.00 kVAC, the DC test from 0.10 kV to 6.00 kVDC, and insulation measurement can be performed at 50 V, 100 V, 250 V, 500 V, and 1000 V. This means that both voltage withstand testing and insulation level checking can be performed with the same instrument.\u003c\/p\u003e\u003cp\u003eFor daily use, it is relevant that the model has ARC detection, zero crossing turn-on, and a PWM switching amplifier. These are features that help with more stable testing and better control during high voltage testing. In addition, there is a remote terminal and Signal I\/O, so the unit can be integrated into a more controlled test setup.\u003c\/p\u003e\u003cp\u003eThe front panel is designed with a display and clear status indicators, making the test process easy to follow. Standard accessories include a power cord, interlock key, remote terminal cable GHT-119, and test lead GHT-114.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;p\u0026gt;The%20content%20is%20generated%20using%20AI%20-%20we%20reserve%20the%20right%20for%20errors.\u0026lt;br\u0026gt;Contact%20HIN%20for%20further%20information%20about%20the%20product.\u0026lt;\/p\u0026gt;\u0026lt;\/a\u0026gt;\u0026lt;\/p\u0026gt;\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289353047,"sku":"GPT-9603","price":11003.72,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_c9b806a3-b59d-4a41-b8f1-55cd00caf2b8.jpg?v=1747851969"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-isolationstest-50-1000vdc-200va-ac","title":"GW-Safety tester 5kV AC\/6kV DC isolationstest 50-1000VDC 200VA AC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9801\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9801 is an electrical safety tester for AC withstand testing, which is the type of high-voltage test used to check whether an item can withstand an alternating voltage without breakdown. It is the simple model in the GPT-9800 series, as it only works with AC hipot testing and is therefore designed for tasks where precisely this test function is needed.\u003c\/p\u003e\u003cp\u003eThe voltage range is from 0.050 kV to 5.000 kV AC, and the frequency can be selected to be 50 Hz or 60 Hz. At the same time, it is designed for a maximum load of 200 VA, and the AC current measurement ranges from 0.001 mA to 40.0 mA. This provides a clear overview of how the item reacts during the test, making the instrument suitable for systematic work with safety requirements and verification.\u003c\/p\u003e\u003cp\u003eIn practice, some of the built-in safety features also make it interesting in a professional environment. It automatically discharges the item after the test, has an interlock function, zero-crossing turn-on, and ARC detection. These are functions that help make the test process more controlled and protect both equipment and user during operation.\u003c\/p\u003e\u003cp\u003eYou can find more details about the design and specifications in the datasheet from the manufacturer: \u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/download\/downloadFile\/10505\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPT-9801\u003c\/li\u003e\n\n\u003cli\u003eType: Electrical Safety Tester\u003c\/li\u003e\n\n\u003cli\u003eTest Function: AC withstand (hipot) test\u003c\/li\u003e\n\n\u003cli\u003eAC output voltage range: 0.050 kV to 5.000 kV AC\u003c\/li\u003e\n\n\u003cli\u003eVoltage resolution: 2 V\u003c\/li\u003e\n\n\u003cli\u003eFrequency: 50 Hz \/ 60 Hz\u003c\/li\u003e\n\n\u003cli\u003eMaximum load: 200 VA (5 kV \/ 40 mA)\u003c\/li\u003e\n\n\u003cli\u003eAC current measurement range: 0.001 mA to 40.0 mA\u003c\/li\u003e\n\n\u003cli\u003eFeatures: Automatic discharge of DUT after test, interlock, zero-crossing turn-on, ARC detection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289451351,"sku":"GPT-9801","price":9785.69,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_8565a52f-5f09-4c1b-b169-3e393892fc0d.jpg?v=1747851970"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-isolationstest-50-1000vdc-200va-ac-dc","title":"GW-Safety tester 5kV AC\/6kV DC isolationstest 50-1000VDC 200VA AC\/DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9802\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9802 is a high-voltage tester for AC\/DC withstand tests. It is used to check whether an item can withstand the applied test voltage without breakdown. In practice, it is a measuring and testing device that provides a controlled high AC or DC voltage while simultaneously monitoring the current during the test.\u003c\/p\u003e\u003cp\u003eOn the AC side, it operates with a voltage range from 0.050 kV to 5.000 kV AC. On the DC side, the range goes from 0.050 kV to 6.000 kV DC. For AC withstand, the specified maximum load is 200 VA at 5 kV \/ 40 mA, and for DC withstand, it is 50 W at 5 kV \/ 10 mA. This makes the model relevant for voltage testing in professional production or test setups where control over both voltage and leakage current is required.\u003c\/p\u003e\u003cp\u003eThere are also a number of features that make the test more practical to work with. ARC detect can identify arcs, and the window comparator method is used to determine if the result is within the set limits. A front panel with a remote terminal and signal I\/O port allows the instrument to be integrated into a controlled test setup, and standard interfaces such as RS-232C and USB device are available. GPIB is available as an option.\u003c\/p\u003e\u003cp\u003eThe front features a 240 x 64 dot-matrix LCD with backlighting, so test data can be read directly. The cabinet measures 330 x 148 x 452 mm, and the weight is approximately 19 kg.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;p\u0026gt;The%20content%20is%20AI-generated%20-%20we%20reserve%20the%20right%20for%20errors.\u0026lt;br\u0026gt;Contact%20HIN%20for%20further%20product%20information.\u0026lt;\/p\u0026gt;\u0026lt;\/a\u0026gt;\u0026lt;\/p\u0026gt;\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289549655,"sku":"GPT-9802","price":11285.44,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_411857c6-f4ab-40ed-bc94-4ce95da0eda9.jpg?v=1747851971"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-isolationstest-50-1000vdc-200va-ac-dc-1","title":"GW-Safety tester 5kV AC\/6kV DC isolationstest 50-1000VDC 200VA AC\/DC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9803\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9803 is an electrical safety tester for checking insulation and breakdown in electrical products. It is used to test whether an item can withstand high voltage without breaking down, and whether the insulation is in order. At the same time, it can measure insulation resistance, providing a more complete picture of whether the required safety distance is maintained.\u003c\/p\u003e\u003cp\u003eIn practice, it is a tester for environments where professionals work with testing electronics and electrical components. Here, it is often important to be able to perform both AC and DC withstand tests, as well as an insulation measurement on the same platform. The GPT-9803 is part of the GPT-9800 series and has the functions suitable for precisely this type of testing.\u003c\/p\u003e\u003cp\u003eFor AC withstand, it can test up to 5.0 kVAC, and for DC withstand, up to 6.0 kVDC. Insulation resistance is measured with DC test voltages from 50 V to 1000 V, and the resistance range goes from 1 MΩ to 9500 MΩ. This makes the instrument relevant when working with electrical safety requirements and wanting to check that a product can withstand the load before being sent further into production or testing.\u003c\/p\u003e\u003cp\u003eIntegration into a workplace has also been considered. Standard units include RS-232 and USB device, and GPIB can be optionally selected. The delivery includes a power cord, interlock key, remote terminal cable (GHT-119), and test lead GHT-114 for the GPT-9803.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-IN\/products\/downloadSeriesSpec\/802\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPT-9803\u003c\/li\u003e\n\n\u003cli\u003eSeries: GPT-9800\u003c\/li\u003e\n\n\u003cli\u003eAC withstand test: up to 5.0 kVAC\u003c\/li\u003e\n\n\u003cli\u003eDC withstand test: up to 6.0 kVDC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance test: 50 V to 1000 V DC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance range: 1 MΩ to 9500 MΩ\u003c\/li\u003e\n\n\u003cli\u003eAC maximum rated load: 200 VA (5 kV \/ 40 mA)\u003c\/li\u003e\n\n\u003cli\u003eDC maximum rated load: 50 W (5 kV \/ 10 mA)\u003c\/li\u003e\n\n\u003cli\u003eStandard interfaces: RS-232, USB device\u003c\/li\u003e\n\n\u003cli\u003eOption: GPIB\u003c\/li\u003e\n\n\u003cli\u003eIncluded accessories: power cord, interlock key, remote terminal cable (GHT-119), test lead GHT-114\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289713495,"sku":"GPT-9803","price":13762.94,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_c38a323e-1000-48d1-865c-309f38f8f295.jpg?v=1747851972"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-isolationstest-50-1000vdc","title":"GW-Safety tests 5kV AC\/6kV DC insulation test 50-1000VDC","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9804\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9804 is an electrical safety tester for checking whether a device can withstand voltage, if its insulation is intact, and if the ground connection is of the correct quality. It combines four functions in one machine: AC withstand, DC withstand, insulation resistance, and ground bond.\u003c\/p\u003e\u003cp\u003eThis makes it practical for production and service environments where multiple safety requirements need to be tested with a single instrument. Instead of switching between several separate meters, you get one device that can be used for high voltage, insulation measurement, and ground bond testing.\u003c\/p\u003e\u003cp\u003eFor AC withstand, testing can range from 0.050 kV to 5.000 kV AC, and for DC withstand, from 0.050 kV to 6.000 kV DC. Insulation resistance measurement operates with test voltages from 50 V to 1000 V DC and measures resistance in the range of 1 MΩ to 9500 MΩ. The ground bond section delivers 3.00 A to 30.00 A AC and can test with up to 6 Vac open circuit.\u003c\/p\u003e\u003cp\u003eThe instrument also features a window comparator, arc detect, ramp-up, and timer functions, allowing for more precise control of the test sequence. This means it can be used for consistent and repeatable safety tests where results can be read and evaluated against fixed limits.\u003c\/p\u003e\u003ch3\u003eTypical Applications\u003c\/h3\u003e\u003cp\u003eThe GPT-9804 is typically used for safety testing electrical products during production, quality control, or troubleshooting. This is especially true when there is a need to check insulation, dielectric strength, and ground connection in the same workflow.\u003c\/p\u003e\u003cp\u003eThe front panel includes memory for both manual and automatic tests, and the instrument has RS232, USB device, SIGNAL IO, and remote terminal connections on the front. GPIB is also available as an option.\u003c\/p\u003e\u003cp\u003eThe display is a 240 x 64 dot matrix LCD with backlight, and the power supply is AC 100\/120\/220\/230 V ±10%, 50\/60 Hz.\u003c\/p\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesSpec\/795\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPT-9804\u003c\/li\u003e\n\n\u003cli\u003e4-in-1 safety tester\u003c\/li\u003e\n\n\u003cli\u003eAC withstanding: 0.050 kV to 5.000 kV AC\u003c\/li\u003e\n\n\u003cli\u003eDC withstanding: 0.050 kV to 6.000 kV DC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance test: 50 V to 1000 V DC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance measurement range: 1 MΩ to 9500 MΩ\u003c\/li\u003e\n\n\u003cli\u003eGround bond test current: 3.00 A to 30.00 A AC\u003c\/li\u003e\n\n\u003cli\u003eGround bond test voltage: up to 6 Vac (open circuit)\u003c\/li\u003e\n\n\u003cli\u003eAC current measurement range: 0.001 mA to 040.0 mA\u003c\/li\u003e\n\n\u003cli\u003eDC current measurement range: 0.001 mA to 010.0 mA\u003c\/li\u003e\n\n\u003cli\u003eResistance measurement range for ground bond: 10 mΩ to 650.0 mΩ\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 240 x 64 dot matrix LCD with back light\u003c\/li\u003e\n\n\u003cli\u003eInterfaces: RS232, USB device, SIGNAL IO, Remote Terminal (Front), optional GPIB\u003c\/li\u003e\n\n\u003cli\u003ePower source: AC100V\/120V\/220V\/230V ±10%, 50\/60 Hz\u003c\/li\u003e\n\n\u003cli\u003ePower consumption: 500VA max.\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 330(W) x 148(H) x 452(D) mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: approx. 19 kg (Max)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cmetadescription\u003eThe GW-INSTEK GPT-9804 is a 4-in-1 safety tester for AC\/DC withstand, insulation resistance, and ground bond testing. See applications and specifications.\u003c\/metadescription\u003e\n\n\u003cp\u003eThe content is generated with the help of AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289910103,"sku":"GPT-9804","price":20590.54,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_c23a3b0e-405f-4db0-8c9b-151c504f5fed.jpg?v=1747851973"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-ac-500va-volt-test","title":"GW-Safety tests 5kV AC\/6kV DC AC 500VA volt test","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9901A\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9901A is an AC hipot safety tester for insulation breakdown and withstand voltage. It is used to check whether a component can withstand a high AC voltage without breakdown or other failure during the test. It is therefore a type of measuring instrument encountered in quality assurance and safety testing of electrical products.\u003c\/p\u003e\u003cp\u003eHere, the focus is on one test function: AC withstand-voltage. The output can be set from 0.050 kV to 5.000 kV with 2 V resolution, and it has a maximum rated load of 500 VA at 5 kV\/100 mA. There are also functions such as ramp, sweep, ARC detect, window comparator, and automatic discharge of the DUT after testing. This makes it easier to run repeated tests in a consistent manner and with more control over the test process itself.\u003c\/p\u003e\u003cp\u003eThe front panel features a remote terminal, and there is a rear output. For connection and control, RS-232C and USB (device) are standard, while GPIB is available as an option. In addition, up to 100 memory blocks can be used for test sequences, so settings can be saved and recalled in a work routine.\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eAC withstand voltage testing in production and quality assurance\u003c\/li\u003e\n\n\u003cli\u003eChecking the insulation capacity of electrical components under high voltage\u003c\/li\u003e\n\n\u003cli\u003eAutomated test sequences with stored programs\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesSpec\/783\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPT-9901A\u003c\/li\u003e\n\n\u003cli\u003eFunction: AC withstand-voltage tester\u003c\/li\u003e\n\n\u003cli\u003eAC output voltage range: 0.050 kV to 5.000 kV\u003c\/li\u003e\n\n\u003cli\u003eOutput-voltage resolution: 2 V\u003c\/li\u003e\n\n\u003cli\u003eMax. rated load: 500 VA (5 kV\/100 mA)\u003c\/li\u003e\n\n\u003cli\u003eMax. rated current: 100 mA at 0.5 kV \u0026lt; V ≤ 5 kV\u003c\/li\u003e\n\n\u003cli\u003eMax. rated current: 10 mA at 0.05 kV ≤ V ≤ 0.5 kV\u003c\/li\u003e\n\n\u003cli\u003eInterfaces: RS-232C, USB (device)\u003c\/li\u003e\n\n\u003cli\u003eGPIB: option\u003c\/li\u003e\n\n\u003cli\u003eRemote terminal (front): standard\u003c\/li\u003e\n\n\u003cli\u003eRear output: standard\u003c\/li\u003e\n\n\u003cli\u003eFunctions: ramp, sweep, ARC detect, window comparator, automatic DUT discharge\u003c\/li\u003e\n\n\u003cli\u003eMemory blocks: up to 100\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722289975639,"sku":"GPT-9901A","price":20375.11,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_206dcad8-fa29-4c9f-a2f4-013256671e35.jpg?v=1747851973"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-ac-dc-500va-volt-test","title":"GW-Safety tests 5kV AC\/6kV DC AC\/DC 500VA volt test","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9902A\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9902A is a high-voltage tester for AC and DC withstanding, meaning a meter used to check whether an item can withstand a certain high voltage without breakdown or unwanted leakage. It belongs to the GPT-9900 series and is relevant in environments where electrical products, components, or assemblies are handled, which need to be tested before delivery or further use.\u003c\/p\u003e\u003cp\u003eThis unit provides both an AC and a DC test function in one device. The AC range goes from 0.050 kV to 5.000 kV, and the DC range from 0.050 kV to 6.000 kV. This makes it suitable when selecting the test method according to the requirements of the current test or product standard. It can deliver up to 500 VA for AC and up to 100 W for DC, so it is built for actual withstand voltage tests and not just simple verification measurements.\u003c\/p\u003e\u003cp\u003eThe instrument has RS-232C and USB as standard, and GPIB is available as an option. In addition, there is a front remote terminal and signal I\/O, allowing it to be integrated into a test setup where control and signal exchange need to be simple. This way, it fits into both manual work and more fixed test processes.\u003c\/p\u003e\u003cp\u003eA datasheet from the manufacturer is also available if you want to see the full specifications.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content is AI-generated - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722290106711,"sku":"GPT-9902A","price":23407.76,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_ce6d764c-3f78-4b6b-840a-56ef6c3fdd31.jpg?v=1747851974"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-ac-dc-500va-volt-test-1","title":"GW-Safety tests 5kV AC\/6kV DC AC\/DC 500VA volt test","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThe GPT-9903A is an electrical safety test (hi-pot) tester from GW-INSTEK in the GPT-9900 series. The unit is a 3-in-1 tester that provides AC withstanding, DC withstanding, and insulation resistance test functions. The product is intended for verifiable high voltage testing in accordance with the functions specified by the manufacturer.\n\n\u003ch3\u003eFunction and Application\u003c\/h3\u003e\nAs a hi-pot tester, the GPT-9903A performs insulation and voltage tests using three separate test methods: AC withstanding, DC withstanding, and insulation resistance measurement. The unit is used to generate controlled high voltages and measure current\/resistance under test conditions, including:\n\u003cul\u003e\n\n  \u003cli\u003eAC withstanding test: up to 5,000 kV AC output (0.050 kV~5.000 kV) with a specified maximum load of 500 VA.\u003c\/li\u003e\n\n  \u003cli\u003eDC withstanding test: DC output range from 0.050 kV to 6,000 kV.\u003c\/li\u003e\n\n  \u003cli\u003eInsulation resistance: measurement range up to 50.00 GΩ for insulation testing.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\nThe description and specifications are taken directly from the manufacturer's datasheet and clearly indicate which test functions and measurement ranges the GPT-9903A supports.\n\n\u003ch3\u003eInterfaces and Operation\u003c\/h3\u003e\nThe GPT-9903A comes with standard RS-232 and USB (device) interfaces. GPIB is available as an option according to the manufacturer's documentation. The unit has built-in functions such as window comparator, ARC detection, ramp times, and time settings as specified in the manufacturer's technical document.\n\n\u003ch3\u003eDocumentation\u003c\/h3\u003e\n\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesSpec\/783\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eModel: GPT-9903A (GW-INSTEK)\u003c\/li\u003e\n\n  \u003cli\u003eFunctions: AC withstanding, DC withstanding, insulation resistance (3-in-1)\u003c\/li\u003e\n\n  \u003cli\u003eAC output range: 0.050 kV ~ 5.000 kV AC\u003c\/li\u003e\n\n  \u003cli\u003eDC output range: 0.050 kV ~ 6.000 kV DC\u003c\/li\u003e\n\n  \u003cli\u003eMaximum AC load: 500 VA\u003c\/li\u003e\n\n  \u003cli\u003eInsulation resistance measurement range: 0.001 GΩ ~ 50.00 GΩ\u003c\/li\u003e\n\n  \u003cli\u003eInterface: RS-232 and USB (device) standard; GPIB as option\u003c\/li\u003e\n\n  \u003cli\u003eDimensions (W×H×D): 330 × 148 × 482 mm\u003c\/li\u003e\n\n  \u003cli\u003eWeight: approximately 27 kg\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nThe content has been generated with the help of AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722290237783,"sku":"GPT-9903A","price":28818.47,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_34b82afd-293d-4402-a627-b15da1442f28.jpg?v=1747851976"},{"product_id":"gw-safety-tester-5kv-ac-6kv-dc-ac-dc-500va-volt-test-2","title":"GW-Safety tests 5kV AC\/6kV DC AC\/DC 500VA volt test","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GPT-9904\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GPT-9904 is a combined high-voltage tester for professional safety and quality control of electrical equipment. It combines four test functions in one unit: AC withstand, DC withstand, insulation resistance, and ground bond. In practice, this means that you can check insulation, dielectric strength, and grounding with the same instrument.\u003c\/p\u003e\u003cp\u003eThis makes the GPT-9904 relevant in environments where electrical products need to be systematically tested before delivery or in connection with production and service. AC and DC withstand are used to stress components and structures with high voltages. The insulation resistance function measures how well conductive parts are insulated. The ground bond function tests the grounding with high current and measures the low resistance in the connection.\u003c\/p\u003e\u003cp\u003eThe instrument covers a wide voltage range. For AC withstand, the test voltage can go from 0.050 kV to 5.000 kV AC, and for DC withstand from 0.050 kV to 6.000 kV DC. Insulation testing is performed with 50 V to 1000 V DC, while ground bond operates with 3.00 A to 32.00 A AC. This provides a single integrated platform for multiple types of safety tests, without the need to switch between several separate devices.\u003c\/p\u003e\u003cp\u003eThere are also functions that are practical in a busy testing process. The instrument features, among other things, a window comparator, arc detect, ramp-up, and timer function. This provides more controlled test procedures and makes it easier to repeat measurements consistently. On the rear panel, there are RS232, USB (Device) and signal I\/O, and there is also a front-mounted remote terminal.\u003c\/p\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cp\u003eThe GPT-9904 is typically used in the testing of electrical products where there is a need to document safety and electrical robustness before commissioning, delivery, or release from production.\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPT-9904\u003c\/li\u003e\n\n\u003cli\u003e4-in-1 tester with AC withstanding, DC withstanding, insulation resistance, and ground bond\u003c\/li\u003e\n\n\u003cli\u003eAC withstand: 0.050 kV to 5.000 kV AC\u003c\/li\u003e\n\n\u003cli\u003eAC withstand maximum rated load: 500 VA\u003c\/li\u003e\n\n\u003cli\u003eAC withstand maximum rated current: 100 mA\u003c\/li\u003e\n\n\u003cli\u003eDC withstand: 0.050 kV to 6.000 kV DC\u003c\/li\u003e\n\n\u003cli\u003eDC withstand maximum rated load: 100 W\u003c\/li\u003e\n\n\u003cli\u003eDC withstand maximum rated current: 20 mA\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance test voltage: 50 V to 1000 V DC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance measurement range: up to 50.00 GΩ\u003c\/li\u003e\n\n\u003cli\u003eGround bond output current: 3.00 A to 32.00 A AC\u003c\/li\u003e\n\n\u003cli\u003eGround bond resistance measurement range: 10 mΩ to 650.0 mΩ\u003c\/li\u003e\n\n\u003cli\u003eInterface: RS232, USB (Device), GPIB option\u003c\/li\u003e\n\n\u003cli\u003eFront remote terminal: Standard\u003c\/li\u003e\n\n\u003cli\u003eSignal I\/O: Standard\u003c\/li\u003e\n\n\u003cli\u003eDisplay: 240 x 64 dot matrix LED back light LCD\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 330 x 148 x 587 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: approx. 27 kg\u003c\/li\u003e\n\n\u003cli\u003eDatasheet: \u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesSpec\/783\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722290499927,"sku":"GPT-9904","price":43111.69,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_c5432b13-1886-44cb-a1e6-ac94bc0cfecd.jpg?v=1747851976"},{"product_id":"gw-instek-gpid-kort-for-gpt-98xx-gpt-99xx-gct-9040","title":"GW Instek GPID card for GPT-98xx\/GPT-99xx\/GCT-9040","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGPIB Interface Card: GPT-9KG1\u003c\/h2\u003e\n\u003cp\u003eThe GPT-9KG1 is a GPIB interface card from GW-INSTEK, described as a field-installed GPIB option for use with specific testers in the GPT series. The product appears on GW-INSTEK's product pages as GPT-9000-01 \/ GPT-9KG1 and is listed as an accessory for selected models.\u003c\/p\u003e\n\u003ch3\u003eWhat it is and what it does\u003c\/h3\u003e\n\u003cp\u003eThe GPT-9KG1 provides a GPIB connection for compatible GW-INSTEK test instruments. According to the manufacturer's documentation, GPIB interface capabilities are used for PC remote control and for logging test results for the GPT-9800 and GPT-9900 series. The product is described and offered as an optional card that adds GPIB functionality to the aforementioned instruments.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and placement\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eCompatible with the GPT-9800 series, GPT-9900, and GPT-9900A (as indicated on the manufacturer's product pages).\u003c\/li\u003e\n\n  \u003cli\u003eAppears in GW-INSTEK's materials as GPT-9000-01 \/ GPT-9KG1 and is referred to as a field-installed GPIB option.\u003c\/li\u003e\n\n  \u003cli\u003eAlso listed as an optional accessory on the GCT-9040 product page.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eTypical applications\u003c\/h2\u003e\n\u003cp\u003eThe use of GPT-9KG1 is directly linked in the manufacturer's material to two functions for compatible testers:\u003c\/p\u003e\n\u003cul\u003e\n\n  \u003cli\u003ePC remote control of the instrument via GPIB.\u003c\/li\u003e\n\n  \u003cli\u003eLogging of test results to an external system via GPIB.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct Name: GPT-9KG1.\u003c\/li\u003e\n\n  \u003cli\u003eManufacturer: GW-INSTEK.\u003c\/li\u003e\n\n  \u003cli\u003eType: GPIB interface card (field-installed option) — specified by the manufacturer.\u003c\/li\u003e\n\n  \u003cli\u003eCompatibility: GPT-9800 series; GPT-9900; GPT-9900A.\u003c\/li\u003e\n\n  \u003cli\u003eMentioned as an optional accessory for GCT-9040 (ground bond tester).\u003c\/li\u003e\n\n  \u003cli\u003ePrimary function (verified): GPIB interface for PC remote control and test result logging of the GPT-9800\/GPT-9900 series.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – we reserve the right for errors.\u003cbr\u003e\nContact HIN for further product information.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722290696535,"sku":"GPT-9KG1","price":2760.06,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_634b856b-ea77-4e69-83dd-e7c3cf5f7468.jpg?v=1747851976"},{"product_id":"gw-19-rack-adaptor-panel-f-gpt-serien-front-177x482-6mm","title":"GW-19 Rack Adapter Panel f\/GPT series front 177x482.6mm","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GRA-417\u003c\/h2\u003e\u003cp\u003eThe GRA-417 is a rack adapter panel used to mount a GW INSTEK instrument into a standard 19\" rack. It is a practical mounting frame for a single GPT or GCT instrument, allowing the equipment to be neatly and securely assembled in a rack environment instead of standing freely on a desk.\u003c\/p\u003e\u003cp\u003eThe solution follows EIA standards and fits standard rack units. In practice, this means it is designed for common 19\" rack mounting, which many professional environments already use. The mounting kit consists of a front panel, bottom cover, L-brackets, handles, and the screws required for assembly.\u003c\/p\u003e\u003cp\u003eIt is a spare part and mounting solution typically chosen when an instrument is to be part of a permanent installation. The manual also shows that the panel is designed for one unit at a time, and that the front must be flush with the front of the rack when correctly installed.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;p\u0026gt;Content%20generated%20with%20AI%20-%20we%20reserve%20the%20right%20for%20errors.\u0026lt;br\u0026gt;Contact%20HIN%20for%20further%20product%20information.\u0026lt;\/p\u0026gt;\u0026lt;\/a\u0026gt;\u0026lt;\/p\u0026gt;\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722291548503,"sku":"GRA-417","price":1574.76,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_dc879043-7cc0-4d5e-821f-8ea91e41ba6b.jpg?v=1747851977"},{"product_id":"gw-19-rack-adaptor-panel-f-asr","title":"GW-19 Rack Adapter Panel f\/ASR","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGRA-439-E Rack Adapter for GW Instek ASR-2000\u003c\/h2\u003e\u003cp\u003eThe GRA-439-E is a rack mount adapter kit for GW Instek's ASR-2000 series of AC\/DC power supplies. In practice, the kit is used to mount the unit in a standard rack, allowing it to be neatly and stably integrated into a permanent installation. This is the EIA variant of the GRA-439 rack adapter.\u003c\/p\u003e\u003cp\u003eWhen a power supply is to be installed in a rack, it's not just about physically placing it. It must also be held securely in place during use, and this is where the included brackets, rails, and panel parts make all the difference. GW Instek's mounting instructions also show how the power supply's handles and feet must be removed before installation.\u003c\/p\u003e\u003cp\u003eThe GRA-439-E is therefore relevant when the ASR-2000 series is to be used in a professional setup with rack mounting. The kit is designed for standardized rack units and is listed as an accessory for the ASR-2000 series by the manufacturer.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722293350743,"sku":"GRA-439E","price":2204.67,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_04142127-9230-4e82-85fa-eee7a50e755d.jpg?v=1747851979"},{"product_id":"gw-hv-scanner-box-5kvac-6kvdc-8-kanals-f-gpt-9800-9900-serien","title":"GW-HV Scanner box 5kVAC\/6kVDC 8-channel f\/GPT-9800+9900 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GSB-01\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GSB-01 is a multiplex scanner box used with the GPT-9800, GPT-9900, and GPT-9900A series. It enables the distribution of test voltage or test current to multiple test points, allowing for more efficient safety testing of electronic products and components.\u003c\/p\u003e\u003cp\u003eThe box features 8 high-voltage channels, and each channel can be incorporated into a setup for sequential multi-point testing. This is particularly useful when the same test needs to be performed on many connections, or when production requires repeated measurements on multiple products. The scanner box supports a high-voltage rating of 5 kVac \/ 6 kVdc and an insulation resistance test of 1 kVdc.\u003c\/p\u003e\u003cp\u003eUp to four scanner boxes can be connected to a single GPT-9800\/9900\/9900A tester, allowing the system to be expanded to a total of 32 channels. Communication between the tester and the scanner box occurs via RS-232C. In practice, this provides a flexible solution when multi-point testing is required in production or for volume testing.\u003c\/p\u003e\u003cp\u003eIncluded accessories are the H.V. wiring lead GHT-108 and the communication cable GTL-235.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;!--nl--\u0026gt;\u0026lt;p\u0026gt;The%20content%20is%20generated%20using%20AI%20-%20we%20reserve%20the%20right%20for%20errors.\u0026lt;br\u0026gt;Contact%20HIN%20for%20further%20product%20information.\u0026lt;\/p\u0026gt;\u0026lt;\/a\u0026gt;\u0026lt;\/p\u0026gt;\"\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722293449047,"sku":"GSB-01","price":15248.09,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_332f39d0-1f87-4c67-a665-ab0ad8d99fe6.jpg?v=1747851979"},{"product_id":"gw-hv-scanner-box-5kvac-6kvdc-6-kanaler-2-kanaler-f-jord-6-ch-hv-2-ch-ground-bond","title":"GW-HV Scanner box 5kVAC\/6kVDC 6 channels + 2 channels f\/ground 6 ch. HV + 2 ch. Ground Bond","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GSB-02\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GSB-02 is a multiplex scanner box for the GPT-9800, GPT-9900, and GPT-9900A series of safety testers. It is used to distribute test voltage or test current to multiple measuring points, allowing for a more systematic approach to safety testing of items and components.\u003c\/p\u003e\u003cp\u003eThis unit provides 6 high-voltage channels and 2 ground bond channels in one device. This makes it suitable when both withstand voltage, insulation resistance, and ground bond tests need to be included in the same setup. Each scanner box can expand the output by 8 channels, and up to 4 scanner boxes can be connected together. This way, a total of up to 32 channels can be achieved in a complete solution.\u003c\/p\u003e\u003cp\u003eIn practice, it is advantageous in testing environments with many points or many identical items where the same test needs to be repeated over and over. The GSB-02 is designed to work with the accompanying tester via RS-232C, and it is powered by AC 100–240 V ±10%, 50\/60 Hz.\u003c\/p\u003e\u003cp\u003eIt is rated for a maximum withstand voltage of 5 kVAC \/ 6 kVDC, an insulation resistance test voltage of 1 kVDC, and a ground bond current rating of 40 A AC.\u003c\/p\u003e\u003ch2\u003eTypical Applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eMulti-point safety testing\u003c\/li\u003e\n\n\u003cli\u003eVolume testing on the production floor\u003c\/li\u003e\n\n\u003cli\u003eTesting of electronic products and components\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eModel: GSB-02\u003c\/li\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GSB-02\u003c\/li\u003e\n\n\u003cli\u003e6 high-voltage channels\u003c\/li\u003e\n\n\u003cli\u003e2 ground bond channels\u003c\/li\u003e\n\n\u003cli\u003eUp to 4 scanner boxes can be connected\u003c\/li\u003e\n\n\u003cli\u003eUp to 32 channels in total\u003c\/li\u003e\n\n\u003cli\u003eMax. withstand voltage: 5 kVAC \/ 6 kVDC\u003c\/li\u003e\n\n\u003cli\u003eInsulation resistance test voltage: 1 kVDC\u003c\/li\u003e\n\n\u003cli\u003eGround bond current rating: 40 A AC\u003c\/li\u003e\n\n\u003cli\u003eInterface: RS-232C\u003c\/li\u003e\n\n\u003cli\u003ePower supply: AC 100–240 V ±10%, 50\/60 Hz\u003c\/li\u003e\n\n\u003cli\u003eDimensions: 330 × 101 × 413 mm\u003c\/li\u003e\n\n\u003cli\u003eWeight: approx. 5.5 kg\u003c\/li\u003e\n\n\u003cli\u003eDatasheet: \u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/10873\/853\" target=\"_blank\" rel=\"noopener\"\u003eView datasheet from manufacturer\u003c\/a\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is AI-generated - we reserve the right for errors.\u003cbr\u003eContact HIN for further product information.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722293547351,"sku":"GSB-02","price":15248.09,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_7976907f-038f-484f-a550-6f51b0f2142f.jpg?v=1747851980"},{"product_id":"gw-testledning-banan-kelvin-f-gom-gdm","title":"GW-Test cord banana\/Kelvin f\/GOM-GDM","description":"\u003cp\u003e. Good Will Instrument GTL-108A. Product type: Test lead, Color of product: Multicolor, Interface: Banana plug. Length: 34 cm, Width: 200 mm, Weight: 100 g\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722294268247,"sku":"GTL-108A","price":584.19,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_5f8804db-918d-41a1-b69d-5f68178a754e.jpg?v=1747851981"},{"product_id":"test-kabel-u-type-med-alligator-klips-t-sikkerhedstester","title":"Test cable, U-type with alligator clip for safety testers","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GTL-116R\u003c\/h2\u003e\u003cp\u003eThe GTL-116R is a GB test lead, meaning a cable for ground bond testing. It is used when measuring the connection to ground in test setups where a safe and stable test connection is important. This is the red version with a U-type connector at one end and an alligator clip at the other.\u003c\/p\u003e\u003cp\u003eIn practice, it is a spare part or accessory included with test equipment from GW Instek. The cable is used with, among other things, the GSB-02 Multiplex Scanner Box and GPT-9904\/9804 testers. In the manual for the GSB-01\/GSB-02, it is referred to as a GB sense\/source L test lead, meaning it belongs in the part of the setup where the ground bond and sense connection must be correctly established.\u003c\/p\u003e\u003cp\u003eThe cable length is approximately 1500 mm, which provides a reasonable working distance in a test setup without the cable becoming unnecessarily long. The red color makes it easier to distinguish it from other cables in the same setup.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722294399319,"sku":"GTL-116R","price":284.47,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_7f6ef2e7-e5bc-45e2-a6b4-e46baf7619c9.jpg?v=1747851982"},{"product_id":"test-kabel-u-type-med-alligator-klips","title":"Test cable, U-type with alligator clip","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GTL-215\u003c\/h2\u003e\u003cp\u003eThe GTL-215 is an earth connection test lead from GW Instek. It is used as a connection lead for ground bond tests, i.e., when checking that an earth connection is made correctly and has the desired contact.\u003c\/p\u003e\u003cp\u003eThe lead is designed as a U-type to alligator clip, making it easy to attach to the point to be tested. This makes it practical in setups where frequent connection and disconnection are required during measurements. The cable length is approximately 1000 mm, providing some working space between the instrument and the test object.\u003c\/p\u003e\u003cp\u003eGW Instek offers the GTL-215 as an accessory in the T \u0026amp; M Accessory \/ General Lead category. It is specified for use with GPT-15004, GPT-12004, and GCT-9040, and also appears as an accessory for selected safety and ground bond testers from the manufacturer. This makes it relevant when working with test equipment that requires a suitable and dedicated lead for this type of measurement.\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eGround bond testing with compatible GW Instek testers\u003c\/li\u003e\n\n\u003cli\u003eConnection between test instrument and DUT via alligator clip\u003c\/li\u003e\n\n\u003cli\u003eUse as a spare part or extra test lead in measurement setups\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: 1100MTL215001\u003c\/li\u003e\n\n\u003cli\u003eModel: GTL-215\u003c\/li\u003e\n\n\u003cli\u003eType: G.B. test lead\u003c\/li\u003e\n\n\u003cli\u003eConnection: U-type to alligator clip\u003c\/li\u003e\n\n\u003cli\u003eCable length: approx. 1000 mm\u003c\/li\u003e\n\n\u003cli\u003eCompatible with: GPT-15004, GPT-12004 and GCT-9040\u003c\/li\u003e\n\n\u003cli\u003eEAN\/GTIN: not specified in verified data\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is generated with the help of AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722294530391,"sku":"GTL-215","price":794.15,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_1dea08eb-16f1-4014-ac28-b7c1021ec106.jpg?v=1747851983"},{"product_id":"gw-kommunikationskabel-rs-232c-f-psp-603-405-2010","title":"GW-Communication cable RS-232C f\/PSP-603+405+2010","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW INSTEK GTL-232A\u003c\/h2\u003e\u003cp\u003eThe GTL-232A is an RS-232C communication cable for GW INSTEK's PSP-603, PSP-405, and PSP-2010 series. It is used when the equipment needs to be controlled or connected via RS-232 remote control, and it is therefore an integral part of the setup when working with remote control in test and measurement environments.\u003c\/p\u003e\u003cp\u003eThe cable is a 9-pin female-to-female null modem cable with a length of approximately 2000 mm. The null modem configuration means it is designed for direct communication between equipment, where signals are crossed so that the correct transmit and receive lines are in place. In the PSP series manual, the GTL-232A is specified as the special cable to be used for RS-232 remote control.\u003c\/p\u003e\u003cp\u003eThe internal connection is documented by the manufacturer: pin 2 is RxD, pin 3 is TxD, pin 4 is +12V (DTR), pin 5 is GND, while pins 1, 6, 7, 8, and 9 are not connected. This is useful when wanting to understand how the cable is constructed in relation to the specific control of the instrument.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content is generated using AI - we reserve the right to make errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722294628695,"sku":"GTL-232A","price":140.87,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_154b1587-b612-42e8-8eb0-a55c98e3bc9a.jpg?v=1747851983"},{"product_id":"gw-ac-millivolt-meter-1-kanal-300µv-100v-i-12-omrader","title":"GW-AC Millivolt meter 1-channel 300µV ~ 100V in 12 ranges","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eProduct Overview\u003c\/h2\u003e\nThis unit from GW Instek is a single-channel analog AC millivoltmeter. The GVT-417B measures AC voltage from 300 µV to 100 V across 12 measurement ranges and indicates decibel level in defined steps.\n\n\u003ch3\u003eFeatures and Contents\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eSingle-channel analog AC millivoltmeter (GVT-417B).\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range: 300 µV to 100 V in 12 ranges.\u003c\/li\u003e\n\n  \u003cli\u003eIndication accuracy: ±3% of full scale.\u003c\/li\u003e\n\n  \u003cli\u003eInstrument input: 10 MΩ (~40 pF).\u003c\/li\u003e\n\n  \u003cli\u003eFrequency response: 20 Hz–200 kHz ±3% and 10 Hz–1 MHz ±10% (reference 1 kHz).\u003c\/li\u003e\n\n  \u003cli\u003eSupplied with user manual, power cord, and one GTL-101 test lead for the GVT-417B.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eDocumentation\u003c\/h2\u003e\nRefer to the manufacturer's specifications for complete technical documentation: \u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesSpec\/936\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's datasheet\u003c\/a\u003e.\n\n\u003ch2\u003eTypical Applications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eThe GVT-417B is used for measuring AC voltage levels in the range 300 µV–100 V and for displaying levels in decibels on the specified ranges.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eTechnical Operation\u003c\/h2\u003e\n\u003ch3\u003eOutput and Power Supply\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003eOutput level: approximately 0.1 Vrms at full scale.\u003c\/li\u003e\n\n  \u003cli\u003eDistortion: \u0026lt; 2%.\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: AC 115V\/230V ±10%, 50\/60 Hz; max. power consumption 10 VA.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\n  \u003cli\u003eProduct: GVT-417B (single-channel analog AC millivoltmeter)\u003c\/li\u003e\n\n  \u003cli\u003eMeasurement range: 300 µV ~ 100 V in 12 ranges\u003c\/li\u003e\n\n  \u003cli\u003eDecibel range: -70 dB ~ -40 dB in 12 ranges (refer to manufacturer's specifications)\u003c\/li\u003e\n\n  \u003cli\u003eAccuracy: ±3% of full scale\u003c\/li\u003e\n\n  \u003cli\u003eFrequency response: 20 Hz ~ 200 kHz ±3%; 10 Hz ~ 1 MHz ±10% (reference 1 kHz)\u003c\/li\u003e\n\n  \u003cli\u003eInput impedance: 10 MΩ, approx. 40 pF\u003c\/li\u003e\n\n  \u003cli\u003eOutput level: approx. 0.1 Vrms at full scale\u003c\/li\u003e\n\n  \u003cli\u003eDistortion: \u0026lt; 2%\u003c\/li\u003e\n\n  \u003cli\u003ePower supply: AC 115V\/230V ±10%, 50\/60 Hz; power consumption 10 VA max.\u003c\/li\u003e\n\n  \u003cli\u003eDimensions: 130(W) × 210(H) × 295(D) mm\u003c\/li\u003e\n\n  \u003cli\u003eWeight: approx. 2.8 kg\u003c\/li\u003e\n\n  \u003cli\u003eIncluded accessories: user manual, power cord, GTL-101 test lead\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch3\u003eSources\u003c\/h3\u003e\n\u003cul\u003e\n\n  \u003cli\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-global\/products\/downloadSeriesSpec\/936\" target=\"_blank\" rel=\"noopener\"\u003eSee manufacturer's datasheet\u003c\/a\u003e\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003e\nContent generated using AI – subject to errors.\u003cbr\u003e\nContact HIN for further information about the product.\n\u003c\/p\u003e\n","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722294890839,"sku":"GVT-417B","price":2175.33,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_30ab6375-7e04-4e50-89e1-477bb7547eda.jpg?v=1747851985"},{"product_id":"arb-funktionsgenerator","title":"Working function generator","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW Instek AFG-3051\u003c\/h2\u003e\u003cp\u003eThe GW Instek AFG-3051 is a 50 MHz arbitrary function generator for tasks where stable and controlled waveforms need to be generated in the laboratory or in test setups. It is used when more than a regular sine wave generator is needed, as it can provide both standard waveforms and custom signals.\u003c\/p\u003e\u003cp\u003eYou get a generator with built-in waveforms such as sine, square, ramp, pulse, noise, DC, sin(x)\/x, exponential rise, exponential fall, and negative ramp. Additionally, it can work with arbitrary waveform data with a 200 MSa\/s sample rate, 1M-point waveform length, and 16-bit amplitude resolution. This makes it suitable when a test signal needs to be adapted to a specific curve or sequence.\u003c\/p\u003e\u003cp\u003eOutputs and operation are designed for practical use. The output level ranges from 10 mVpp to 10 Vpp at 50 Ω, or up to 20 Vpp without load. There is short-circuit protection, and the output impedance can be switched between 50 Ω and Hi-Z. The front panel features a 4.3\" TFT LCD screen, and the instrument can be connected via GPIB, RS-232, and USB. There is also Direct Waveform Reconstruction (DWR), which is part of how the instrument handles waveforms.\u003c\/p\u003e\u003cp\u003eIn practice, it is an instrument for testing, troubleshooting, and development, where signals need to be recreated and varied in a controlled manner. Such functions are typical in electronics production, service, and laboratory work.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\u0026lt;\/p\"\u003e\n\n\u003cp\u003eThe content has been generated with the help of AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e\u003c\/a\u003e\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722308882775,"sku":"HI-AFG-3051","price":16315.78,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/AFG-3000Series_17010516186.jpg?v=1769369467"},{"product_id":"digitalmultimeter","title":"Digital multimeter","description":". \u003cp\u003eThe GDM-8245 is an economical bench-top DMM equipped with a rich set of features. The GDM-8245 has similar functions to those of GDM-8246, but with slightly reduced DCV accuracy and no communication interface. The large 7 segment LED dual display features up to 50,000 counts and the ability to show two measurements at once: ACV plus frequency or dBm, DCV plus dBm or ACV ripple. The GDM-8245 carries an extensive list of measurement items - DC Voltage\/Current, AC Voltage\/Current with true RMS, Resistance, Capacitance, Frequency, Continuity (with beeper), Diode Test, and dBm. Additional measurement functions, such as Max\/Min, Hold and Relative value. With great range, good accuracy and ability to accept up to 20A of current, the GDM-8245 is the perfect general purpose DMM.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722310914391,"sku":"HI-GDM-8245","price":3069.56,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_cac14c3d-c389-41c1-8eaa-a475f6fcc17a.jpg?v=1747852020"},{"product_id":"general-kit-set-option-til-gsp-800-serie","title":"GENERAL KIT SET Option for GSP-800 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW Instek GKT-001\u003c\/h2\u003e\u003cp\u003eThe GKT-001 is a general accessory kit for GW Instek's GSP series of spectrum analyzers. It is assembled to provide the most commonly used RF connections and an attenuator in one place when measuring signals in a professional setup.\u003c\/p\u003e\u003cp\u003eIn practice, the kit makes it easier to get started with RF measurements without having to assemble the parts individually. It includes two ADP-002 adapters from SMA (J\/F) to N (P\/M), an ATN-100 10 dB attenuator, two 60 cm GTL-303 RF cables, and a GSC-002 kit box for storage. GW Instek also describes the kit as an aid for RF signal measurement, especially as an attenuator for longer RF signals.\u003c\/p\u003e\u003cp\u003eFor the GSP series of spectrum analyzers, this type of accessory is relevant because it often requires both adaptation between connector types and a simple way to attenuate the signal so that the connection matches the task. Therefore, the GKT-001 is a practical supplement when the measurement setup needs to be flexible and packaged in one kit.\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eRF signal measurement with GSP series spectrum analyzers\u003c\/li\u003e\n\n\u003cli\u003eAdaptation between SMA and N connectors\u003c\/li\u003e\n\n\u003cli\u003eRF signal attenuation with 10 dB attenuator\u003c\/li\u003e\n\n\u003cli\u003eAssembly and storage of accessories for measurement setups\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW Instek\u003c\/li\u003e\n\n\u003cli\u003eMPN: GKT-001\u003c\/li\u003e\n\n\u003cli\u003eContents: ADP-002 (SMA (J\/F) to N (P\/M) adapter) ×2\u003c\/li\u003e\n\n\u003cli\u003eContents: ATN-100 (10 dB attenuator) ×1\u003c\/li\u003e\n\n\u003cli\u003eContents: GTL-303 (RF cable assembly, RD316, SMA(P), 60 cm) ×2\u003c\/li\u003e\n\n\u003cli\u003eContents: GSC-002 (kit box) ×1\u003c\/li\u003e\n\n\u003cli\u003eAccessories for: GSP-Series spectrum analyzers\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is AI-generated - we reserve the right for errors.\u003cbr\u003eContact HIN for further product information.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722312290647,"sku":"HI-GKT-001","price":2556.87,"currency_code":"DKK","in_stock":true}]},{"product_id":"catv-kit-se-option-til-gsp-800-serie","title":"CATV KIT SE Option for GSP-800 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GKT-002\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GKT-002 is a CATV Kit Set for the GSP-series spectrum analyzers. In practice, it is a complete accessory set for working with 75 ohm systems, providing the correct parts from the start. This is precisely why the kit exists: to ensure that the setup matches measurements where 75 ohms is the starting point.\u003c\/p\u003e\u003cp\u003eThe set includes ADP-001, ADP-101, GTL-304, and GSC-003. GW Instek also states that a 75 ohm kit provides an operational accessory set for 75 ohm systems. This is important because using 75 ohm components in a 50 ohm system can cause impedance mismatch and thus measurement errors. Therefore, the choice is not just about connectors and cables, but about achieving a setup that matches the correct impedance.\u003c\/p\u003e\u003cp\u003eThe GKT-002 is used as a practical accessory package for the GSP series when you want to avoid assembling the parts individually. It provides a more organized setup around the instrument and ensures that the included parts belong together for the intended application.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"\" target=\"_blank\" rel=\"noopener\"\u003eSee datasheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eTypical applications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eAccessory set for GSP-series spectrum analyzers\u003c\/li\u003e\n\n\u003cli\u003eConnection in 75 ohm systems\u003c\/li\u003e\n\n\u003cli\u003eCATV-related measurement setups\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GKT-002\u003c\/li\u003e\n\n\u003cli\u003eProduct: CATV Kit Set\u003c\/li\u003e\n\n\u003cli\u003eSeries: GSP-Series\u003c\/li\u003e\n\n\u003cli\u003eIncludes: ADP-001, ADP-101, GTL-304, and GSC-003\u003c\/li\u003e\n\n\u003cli\u003eSystem: 75 ohm\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated with AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722312978775,"sku":"HI-GKT-002","price":3157.99,"currency_code":"DKK","in_stock":true}]},{"product_id":"rlb-kit-set-option-til-gsp-800-serie","title":"RLB KIT SET Option for GSP-800 series","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGW-INSTEK GKT-003\u003c\/h2\u003e\u003cp\u003eThe GW-INSTEK GKT-003 is an RLB Kit Set for GSP series spectrum analyzers. It is used as an accessory for measurements where proper RF equipment needs to be connected to the analyzer. The kit brings together the parts typically needed for this task, simplifying and standardizing the connection in practice.\u003c\/p\u003e\u003cp\u003eThe kit includes GAK-001, GAK-002, GTL-302, and GSC-004. Among these are a 50Ω termination, a cap with a chain, and a 300 mm RG223 RF cable. GW Instek's own FAQ also mentions that the kit can be used for tasks such as tracking generator normalization with the RLB-001 return-loss bridge. This makes it relevant in setups where RF connections need to be controlled and a correct termination of the signal path ensured.\u003c\/p\u003e\u003cp\u003eIf you work with the GSP series and need the right accessories gathered in one place, the GKT-003 is therefore not the measuring instrument itself, but the practical kit for the measurement setup.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/23753\/2375\" target=\"_blank\" rel=\"noopener\"\u003eSee data sheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GKT-003\u003c\/li\u003e\n\n\u003cli\u003eProduct type: RLB Kit Set\u003c\/li\u003e\n\n\u003cli\u003eAccessory for: GSP-Series spectrum analyzers\u003c\/li\u003e\n\n\u003cli\u003eContains: GAK-001, GAK-002, GTL-302 and GSC-004\u003c\/li\u003e\n\n\u003cli\u003eGAK-001: 50Ω termination (N(P\/M))\u003c\/li\u003e\n\n\u003cli\u003eGAK-002: cap with chain (N(P\/M))\u003c\/li\u003e\n\n\u003cli\u003eGTL-302: RG223 RF cable assembly, 300 mm (N(P\/M))\u003c\/li\u003e\n\n\u003cli\u003eApplication according to GW Instek's FAQ: support for tracking generator (TG) normalization with RLB-001 return-loss bridge\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eContent generated using AI - we reserve the right for errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722313503063,"sku":"HI-GKT-003","price":2091.21,"currency_code":"DKK","in_stock":true}]},{"product_id":"volume-guard","title":"Volume Guard","description":"\u003cp\u003e\u003c\/p\u003e\u003ch2\u003eGPS-001\u003c\/h2\u003e\u003cp\u003eThe GPS-001 is a small control knob for GW Instek's GPS-x303 series of linear DC power supplies. It is used for voltage and current protection and is listed as an optional accessory for the series.\u003c\/p\u003e\u003cp\u003eOn GPS series power supplies, it practically refers to the part used to control or protect the setting of output voltage and current. When located on the front panel, it makes daily operation clearer in a professional test or laboratory setup, where precise settings are often used, and accidental changes are to be avoided.\u003c\/p\u003e\u003cp\u003eThe accessory is associated with the GPS series, which are linear DC power supplies with 2 to 4 independent, isolated outputs and a total power of 180 W to 200 W depending on the model. In this context, the GPS-001 serves as a simple but relevant spare part when seeking the original control knob for the instrument.\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/www.gwinstek.com\/en-US\/products\/downloadSeriesDownNew\/8098\/1213\" target=\"_blank\" rel=\"noopener\"\u003eSee data sheet from the manufacturer\u003c\/a\u003e\u003c\/p\u003e\u003ch2\u003eSpecifications\u003c\/h2\u003e\u003cul\u003e\n\n\u003cli\u003eManufacturer: GW-INSTEK\u003c\/li\u003e\n\n\u003cli\u003eMPN: GPS-001\u003c\/li\u003e\n\n\u003cli\u003eProduct name: GPS-001\u003c\/li\u003e\n\n\u003cli\u003eDescription: Knob, Voltage\/Current Protection Knob\u003c\/li\u003e\n\n\u003cli\u003eType: Optional accessory for GPS-x303 series linear DC power supplies\u003c\/li\u003e\n\n\u003cli\u003eCompatible series: GPS-2303, GPS-3303, and GPS-4303\u003c\/li\u003e\n\n\u003cli\u003eFunction: Voltage\/Current Protection Knob\u003c\/li\u003e\n\n\u003cli\u003eListed in GPS series datasheet as available in Oct\/07 production batch\u003c\/li\u003e\n\n\u003cli\u003eEAN\/GTIN: not provided in verified data\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003cp\u003eThe content is AI-generated - we reserve the right to make errors.\u003cbr\u003eContact HIN for further information about the product.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722314289495,"sku":"HI-GPS-001","price":41.44,"currency_code":"DKK","in_stock":true}]},{"product_id":"ac-millivoltmeter-10-hz-1-mhz-analog","title":"AC Millivoltmeter 10 Hz ~ 1 MHz analog","description":". \u003cp\u003eThe GW Instek GVT-417B AC Millivolt Meter is a compact analog AC millivoltmeter ideal for low level voltage measurements beyond ordinary multimeter capabilities; 300uV sensitivity is maintained over 100V full scale. The GW Instek GVT-417B provides dual channel measurement, simultaneously or separately. Voltage scale is separated into 12 ranges, instantly accessible by a large rotary selector. The wide measurement range (10Hz to 1MHz) and voltage (-70dB to +40dB) provide ample headroom for most applications.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722314813783,"sku":"HI-GVT-417B","price":2175.33,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_32eac95c-14f8-404b-90da-6be3efa3eba1.jpg?v=1747852020"},{"product_id":"lcr-adapter","title":"LCR Adapter","description":". \u003cp\u003eGW Instek LCR-05 Test Fixture for Axial and Radial Lead Components.\u003c\/p\u003e","brand":"GW-Instek","offers":[{"title":"Pcs","offer_id":50722315403607,"sku":"HI-LCR-05","price":1523.96,"currency_code":"DKK","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0903\/8312\/2775\/files\/BC_Upload_51175bdf-1a19-4ca6-9a88-456487574394.jpg?v=1747852021"}],"url":"https:\/\/hin.dk\/en\/collections\/gw-instek.oembed?page=3","provider":"HIN A\/S","version":"1.0","type":"link"}